swg

Hello I have a Jandy AquaPure with IAquaLink. Three days ago I started getting an error message reading on my interface app showing water temp SHORT and my salt water generator stopped producing chlorine. I have chlorine production set to 75% in the app but it reads 00% on the panel. By all...

Hi all! We recently installed a SWG system for our pool, and we just opened the pool today. I know we need to balance everything first and then add some liquid chlorine before we add the salt and get the SWG going. At opening these were my levels: FC- 0 PH- 6.8 TA- 40 CYA- 30 I have sodium...

Hi! Anyone have an Intex Krystal Clear SWG? Are you following the manufacturer CYA levels or pool school? Why would there be a difference in recommendations between the two?

Hey Everyone, *Pics at bottom for reference* Looking to eliminate having to constantly add PH and chlorine… because well, I’m lazy and tired of the weekly chemical additions 🙃 Ultimately I’d like to automate and tie in my Hayward VS pump, a SWG, and a PH control system. I have an older style...

Hello everyone, I am going to be purchasing a new SWG this season and am trying to plan how I am going to wire this thing up. I currently have a single speed pool pump(120v) running off a timer. I understand that the preferred way to wire the SWG is to have a 2nd wiring run off the timer to...

I've read through quite a few posts posts on this topic, but still cannot definitively determine what is or isn't in my EasyTouch box. I would like to convert my pool to salt by installing an IC60. I wasn't sure that I wanted salt water when the pool was under construction, but I instructed the...

Hi there! Sorry in advance for the long post. I've been deep in Pool School for a couple of weeks and am finally starting the balancing process today. We recently purchased a home with a salt water pool; the previous owner walked us through his care routine when we got the keys in Feb. He told...

Hi, everyone. Thanks in advance for your advice. We just had our 22k gallon pool rebuilt with aluminum coping and we're in the process of filling it back up with water. I've been using a Hayward SWG since we bought the house in 2012. As of last summer I was on my third generator. Also last...

Hi, I decided to switch to the Salt Chlorine Generator system, based on my search here I realized CircuPool is very famous especially the RJ model because of the warranty and easy installation( I plan to install it myself) Right now the EDGE-40 is $1199 which is $300 cheaper than RJ45, Is there...

Hey all, First post here! My spa specs are below: Hotsprings Flair 335 gallons FC - 15 CC - 0 TA - 70 CH - 200 CYA - 100 pH - 7.5 salt - 1700 ppm Temp - 99° So here is the scenario. I've used the TF pro kit for my SWG pool for a while and it works great. We just got the spa 2 months ago...

Hi fellow Intex SWG owners! Anytime I try to set it up, I get the 93/Power Saving code OR it's turned on and generating, so the buttons don't do anything. Help!

I'm brainstorming the idea of a SWG for a small steel-framed, vinyl liner 1718gal pool that is annoying to maintain chlorine daily. In an old post, I saw a someone mention to oversize SWG 2-3x the capacity of your pool, i'm presuming so that you can generally maintain your FC at a lower SWG...

Hi there! Been reading all of the forums and went through "pool school" twice, but I'm at a little bit of a loss on what to do. ~15,000 Gal. Saltwater Pool Measurements: FW:1.2 Total Chlorine: .22 pH: 7.8 TA: 96 CH: 167 CYA: 5 Phosphates: 495 Salt: 1263 Water Temp: 62F Any thoughts on what...

I just converted to an and opened my salt water pool. Yellow jackets are a problem here. Last year, in my chlorine pool, I would have to manually kill yellow jackets in the pool. On the first full day of SWG, 3 yellow jackets were dead on their own? Is it a salt intake kill or a surface...

HI! I'm opening my pool right now. Water is clear after removing my winter cover! Yay! Okay. Last year, it was a liquid chlorine pool. This year, I'm currently installing an SWG. Do I need to shock the pool first before adding my salt and turning on the SWG? Or, could I add the salt, set my...

After massive rains Zodiac SWG is displaying "Output Fault" error. I disassembled it, but do not see any damaged elements. I'm curious if anyone can advise me please what I need check to return it to life.

I'm thinking about installing a saltwater chlorine generator and trying to plan it out with my current setup. I'm comfortable doing some PVC cutting and cementing, but need some guidance on how to work with what is already there - I'm not familiar enough with all the various PVC connection types...

Hi, we have a newly acquired pool and planning to DIY the maintenance and add SWG, probably Pentair IC60 since the existing equipment is all Pentair. My question is what value does the automated system add versus syncing up the pool timer and SWG timer? The pool doesn’t get that dirty but...

The Water Flow LED on my Edge-40 comes on about 10 seconds after switching on the SWG. I've tested the flow switch with a multimeter and it is working fine (~zero ohms between the two pins when the pump is on, open circuit when pump is off). It has been working fine for a about a year and a...

Hey all, does anyone have experience going from an ic40 to ic60? The plumbing connections and power center wire are the same, if I just plug and play will the Easy Touch control center recognize the difference?

I've read some other threads about this, but I'm not seeing an answer. Our Hayward SwimPure Plus began reading salt levels of only 400, then 200, then zero. Manually checking the salt it is around 3400. We checked the SWG which is 6 months old and it definitely needed cleaning. It is now all...

Hi everyone, I've decided on getting a CircuPool RJ-60 PLUS Salt Chlorine Generator after much research on this site and other places. However, before I buy, do you think 60k SWG is overkill for a 26k pool? Should I consider the 40k SWG? I have a single speed pump, not variable speed, so I'm...

I'm draining my Intex. We want to us that space for something else in the winter so we will not leave it up. I have a few questions: 1. How do I close the pump and SWG? 2. I want to give her a good scrub down. What dilution bleach water for cleaning the empty pool? 3. I want to store the...

system consistently reads 600 to 800 ppm below confirmed actual Also, when I reset instant reading & countdown then settles. The (-) is consistently 1/2 or less of the (+) reading as follows; also note big difference in amperes, these should be the same Values just reverse. a) -27.2v. -3.9amp...

Hello, all, At our old home we had an AG traditional chlorine pool and you guys were super helpful teaching me about operating it. So now I am coming to you looking for additional advice. My husband and I are about to purchase a 16’ x 32’ with 8’ deep end inground pool (21,000+gallons). This...

Hi guys, I'm a new pool owner and am having high pH, 8.2, every test. I've been adding the muriatic acid as recommended in the pool calculator, but each test seems to be same - 8.2. Is this expected for a new pool? Also, more info, after one month we turned on the swg. Should I be testing...

As the title suggests, with each new day the SWG Checks Salt indicator is lit (when salt is in fact 3000+) and I have to manually calibrate in order to start Generating. Every day for so many days lol. Not a new issue, we bought the house 6 months and this issue has always been present. Pool...

43k pool Jandy PLC1400 swg 1.5 hp Jandy stealth pump 1.5 inch return line CYA 60 Run time for pump 24hrs a day zone 8 East Texas My FC runs between 1 and 3 and have had some algae issues this year so was wondering if I could add a second SWG system parallel to my existing swg to get enough...

Hi, I have a SWG Powercenter that was wired into the GFCI and works great for the most part - I would like to connect it directly to the Pump Relays in the main electrical panel - I cant seem to find any instructions online for this. anyone have any instructions ? The manual that comes with the...

I had a mess this week, went on vacation, came back green pool. thats all fixed now, but my drum that i thought would last til winter is empty and its got me thinking about a SWG. I bought a stenner pump with tank earlier this year which is great but it ran out (due to my math being wrong)...