Hi I have a 16x32 steel wall vinyl lined pool. 3 years ago I had all the plumbing to the pool dug up and professionally replaced, had the liner replaced and new concrete pool deck poured. This winter I have found that the pool has a leak and I have various water filled bulges behind the liner. I have been watching the water level and found it stops consistently at the same level. I am reaching out to see if anyone here may have suggestions at to the possible causes. I will be reaching out to the company that did the rehab work and want to be fully informed when talking with them.

A little more background, the pool was installed in the early 1970’s. I have been the owner for 14 seasons with no issues. This winter was typical, with no real frost, deep freeze or heavy snow issues. I have a “loop lock” mesh safety cover and the pool was closed without issue. Any help would greatly appreciated.

Hello, I'm planning on adding a SWG to my pool and have read that the SWG needs to go after the filter, but I'm wondering if it can go before the multiport because I would have to need to redo a significant amount of the plumbing in order to put it after.

Thanks in advance.

Hi, folks. Happy to be here for the new season.

Been cleaning the pool for three days or so since opening and I think we’re in surprisingly good shape!

No visible algae, pool is clear.

Any thoughts other than getting the salt up? (And maybe dealing w the CH, which for a vinyl pool I’ve not spent any time worrying about? I’ve not tested it in forever…)

Thanks!

Looking for 7.5” Trojan coping.