Latest activity Postings Media Albums About
-
-
Jimrahbe replied to the thread Converting from 120 v lights to 12V lights.See if this helps.. If you are using a GFCI breaker, the neutral goes back to the GFCI breaker neutral and not the panel neutral... -
Jimrahbe reacted to Piperca's post in the thread Upgrading to automation ... couple of questions. with
Like.
Jim, with the 15% discount it comes out to be $1130 plus tax. -
Jimrahbe reacted to ajw22's post in the thread Intellicenter Questions as I Upgrade my Automation & Pump with Like.
Bergen County NJ still has blue laws. Only essentials like food and drugs can be sold on a Sunday. If I needed any parts I would have...
-
Jimrahbe replied to the thread Pentair SWG IC40 no lights, not turning on.Talk with the pool builder and tell him you want it wired correctly. Tell him you want a different tech than the one who wired what you...
-
Jimrahbe replied to the thread Spa spillover shutoff.emb, You had a lazy and cheap pool builder who just off-set your Return valve instead of adding a make-up valve that you could have...
-
Jimrahbe replied to the thread Pentair SWG IC40 no lights, not turning on.419, Wow!! Please tell me who wired your system? Unfortunately, it is not even close to being wired correctly. If you are trying...
-
Jimrahbe replied to the thread Pentair SWG IC40 no lights, not turning on.419, You only have one relay that has any wires going to it. The relay on the top left with the black and blue wires. I need to know...
-
Jimrahbe reacted to MiggyV's post in the thread No flow when pool cleaner is disconnected. with Like.
That seemed to do the trick. Thanks for the help!
-
Jimrahbe replied to the thread Need Help Setting Skimmer Valve on the Return Side.Richard, https://aamfg.com/product/quikskim-venturi-powered/ Might not be your specific one, but will give you the idea, Jim R.
-
Jimrahbe replied to the thread TA Not Budging.Gold, Lowering TA is a not a one and done thing. When I used to do that, it would take me two days and I had to add acid about ever...
-
Jimrahbe replied to the thread Need Help Setting Skimmer Valve on the Return Side.Richard, You have one of those "Magic" skimmers that uses return water to help the skimmer work. More marketing than a real thing, so...
-
Jimrahbe reacted to 1poolman1's post in the thread Spa water level dropping when spa is in use with Like.
Both ports that are connected to the pool must be completely off. For a spa to drain in use, the return valve is usually the culprit...
-
Jimrahbe replied to the thread No flow when pool cleaner is disconnected..Or better yet, move up into this Century and get a Robot, like this one...
-
Jimrahbe replied to the thread No flow when pool cleaner is disconnected..M, If you turn the valve the poolman is talking about so that it only runs the vac, then when you remove the vac, the pump will get no...
-
Jimrahbe replied to the thread No flow when pool cleaner is disconnected..M, Looking at the right Red valve, was the pic taken when in the spa mode? This is what is puzzling me. There is only one line coming...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…