• HermanTX
    HermanTX replied to the thread Hi from Texas.
    If you could not see the dot at 30 but can see at 40 then it is 40
  • PoolStored
    PoolStored replied to the thread Hi from Texas.
    It’s 40 then.
  • PoolStored
    PoolStored replied to the thread 2nd Time Pool Owner.
    No normal duration. Takes what it takes.
  • PoolStored
    PoolStored replied to the thread Hi from Texas.
    Calll it 50.
  • P
    I don't think you mean ScreenLogic as I obviously have the app for the Mac, I think you mean the program that directly interfaces with...
  • C
    cthenrys replied to the thread 2nd Time Pool Owner.
    So I am on day 4 of the SLAM. Water is crystal clear (maybe the clearest it's been since I moved here). Chlorine dropped a little...
  • ajw22
    Welcome to TFP. If no access is needed to the outside walls, the gunite can be backfilled after the shot. Gunite will cure fine in the...
  • B
    I use the blue stuff as well. Just apply some to both the pipe and the socket and then insert the pipe within 10 seconds (and hold it...
  • B
    Bperry replied to the thread Stains all over pool.
    The only way for copper to get in the water is for someone to put it in there. What products do you use to maintain the chlorine? The...
  • ajw22
    ajw22 replied to the thread Stains all over pool.
    Welcome to TFP. Copper in pools do not come from trees or mulch. Read...
  • PoolStored
    PoolStored replied to the thread Hi from Texas.
    Demand of 4.5 isn’t unheard of, but seems high for spring in tx What is your cya? May be low. Dose above range so you are IN range...
  • A
    Hi all, I need to replace my Hayward pump with a new one of the same model. I have a question regarding the wiring connector. During the...
    • 1747058446031.png
    • 1747058556548.png
  • A
    Alberto added the media item 1747058556548.png to Pool Equipment.
    1747058556548.png
  • A
    Alberto added the media item 1747058446031.png to Pool Equipment.
    1747058446031.png
  • R
    The pool was originally built with a pressure-side cleaner system. There are 5 jets in the pool — 4 are connected to the filter return...
  • PoolStored
    PoolStored replied to the thread Failure to prime.
    Dirty filter, clogged skimmers.
  • mknauss
    mknauss replied to the thread Dead or Mustard Algae.
    Can you pass an ?
  • Rancho Cost-a-Lotta
    The Calimar pump is almost exclusively sold by Pool Supply Unlimited. Look for the "parts available" link to view which parts are...
  • K
    I’m having issues getting rid of what’s in the bottom of my pool since I opened it up this year. I’ve read articles but I cannot figure...
    • IMG_7393.jpeg
    • IMG_7395.jpeg
  • ajw22
    What bag are you using in your Pool Baster cleaner?
  • K
    Kaspergbge added the media item IMG_7395.jpeg to SLAM.
    IMG_7395.jpeg
  • K
    Kaspergbge added the media item IMG_7393.jpeg to SLAM.
    IMG_7393.jpeg
  • Jimrahbe
    Chris, Until recently I had three saltwater pools that all had IntelliChlor SWCGs.. I had the pools for well over 12 years, so I have...
  • P
    poolmedic244 replied to the thread Failure to prime.
    I just read that post cover to cover. That's awesome. Thank you. There is a significant amount of algae in the pool...that's what...
  • Rancho Cost-a-Lotta
    My 2 cents... After looking at prices of the smaller containers compared to the larger ones, I took a risk nearly 4 years ago and...
  • S
    I am having issues with my Pentair intellichlor. The cell light keeps flashing green and it stops working. I had the intellichlor 20 and...
  • tomas21
    Thanks Jeff. I ordered these with the new Stenner injector and will be swapping out today to see how performance "hopefully" improves...
  • agjr85
    Following as we are looking at doing pavers and I hate to deal with pavers's on sand. But didn't think about doing a concrete base, then...
  • Filter