Latest activity Postings Media Albums About
-
-
mknauss replied to the thread Hello from West Palm Beach Florida.Welcome to the forum. I suggest your review -
mknauss replied to the thread Cannot connect to Screenlogic.Welcome to the forum. So you can connect using the iOS app, but not via computer. Is the Protocol Adapter connected to your router...
-
mknauss replied to the thread First water test on my own.Have you added Borates? Your water will not have Borates unless you have added them.
-
mknauss replied to the thread First water test on my own.Welcome to the forum. Have you added Borates? How did you test 15 ppm Borates? CYA is measured in 10's. You cannot interpolate between...
-
mknauss replied to the thread Chlorine generator is off for the winter Now What?.Use Add liquid chlorine/bleach to keep your FC based on your CYA in the target range for liquid chlorine use. I suggest testing at...
-
mknauss replied to the thread Hello! Glad to be here.Welcome to the forum. I suggest you review
-
mknauss replied to the thread Hello from La Crescenta, CA.Welcome to the forum! I suggest you review
-
mknauss replied to the thread CSI Excel formula?.As long as you enter the assumptions for Borate and Salt the same in each calculation.
-
mknauss replied to the thread What is this valve doing?.Exactly. One can use liquid chlorine. For most, that means adding the liquid chlorine daily during swim season, and then less during the...
-
mknauss replied to the thread Will an LED pool light still show continuity if it failed?.I do not have the Pooltone lights as of yet. They will be used when my current Globrites fail. The plus is Florida Sunseeker now has the...
-
mknauss replied to the thread Rapid CYA increase.If you have actuated valves, you have some form of automation. Most have a means to set up spillover to limit the run time of the spa...
-
mknauss replied to the thread Loose white power on top of random coping tiles.Possibly efflorescence https://www.troublefreepool.com/wiki/index.php?title=Efflorescence
-
mknauss replied to the thread Can’t get first prime.Welcome to the forum. Typically a pump that will not prime is either due to water level too low in pool, a suction side air leak...
-
mknauss reacted to mgtfp's post in the thread New SWG not producing the specified amount of chlorine with
Like.
OK, there is an update. Fluidra service tech came out yesterday. No spiel about phosphates or water parameters in general, didn't even... -
mknauss replied to the thread Adding chemicals.It is a TFP recommendation. I use a skimmer sock. Put the CYA in the sock with it installed on the skimmer basket.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…