Latest activity Postings Media About
-
-
PIt is kind of upside down. It isn't bypassing the heater. I have replaced the sensor and now it is heating up. But I also think there...
-
PPoolbreh replied to the thread Raypak heater stalling at 98 in spa.The heater bypass was closed during the time you encountered the problems? It appears closed in the picture. Everything else looks good.
-
PPoolbreh replied to the thread Raypak heater stalling at 98 in spa.Can you post one further away of all the plumbing? Suction side and return
-
PPoolbreh replied to the thread Raypak heater stalling at 98 in spa.Can you post pic of plumbing going to heater?
-
PPoolbreh replied to the thread Raypak Heater 156 winterizing.The plug should unscrew. The white plug is your thermistor. The pressure switch is located underneath the manifold on the 156a you will...
-
PPoolbreh replied to the thread Raypak 406A not lighting.You would check 24vac(volts) on mv and mv/pv(common) on automatic gas valve. Keep in mind during spark it will send 24vac to pv and...
-
PPoolbreh reacted to Destinius's post in the thread Pentair Mastertemp 300 not working right after cleaning with
Like.
Thank you @Poolbreh and sorry for the late reply. We had to close the pool as it got really cold up north here. Before that, I... -
PPoolbreh replied to the thread Pump squealing in the cold.I agree it sounds like bearings. The shaft seal is more of a high pitch sound.
-
PPoolbreh replied to the thread Pump squealing in the cold.Not enough evidence to confirm, but in my experience the shaft seal can squeal when The water temp drops. I have assumed this by...
-
PPoolbreh replied to the thread Minimax Heater NT; NOT IGNITING.The fins on the mini max nt blowers corrode over time, honestly they are a fire hazard as they age. They can still trip ps and and not...
-
PI guess it depends on how much you want to know. I don't know what's in sausages, but know that I like them once in a while, and I eat...
-
PPoolbreh replied to the thread Repair advice on old pool.If there isn’t rebar it’s not worth fixing, any cracks will reoccur with any shifting of the pool. You will need to either start over or...
-
PPoolbreh replied to the thread H400FDN gas valve.You will need to check the inlet and outlet static and dynamic wc when the valve opens(energized) and it needs to be within the...
-
-
PPoolbreh replied to the thread Repair advice on old pool.Not knowing the typical building process for your area makes it hard to comment. My initial thought is using anchors if anchors aren’t...
-
-
Loading…
-
Loading…
-
Loading…
