Latest activity
S
sande005 replied to the thread Featured Stubborn algae afte SLAM.
At your current CYA, turn on the SWCG when it gets to about 7-9. Then test daily to see whether it makes it climb or drop. CL is...
Newdude replied to the thread Water is still cloudy after multiple treatments.
Depends on the mailman I guess.
J
James L. replied to the thread Main filter pump breaker tripped.
Thanks.
Any feelings about the Pentair Whisperflo vst 011533?
PoolStored replied to the thread Main filter pump breaker tripped.
The old whisperflo has a different set of dimensions from the new whisperflo. I don't know a drop in replacement.
With the easytouch...
ajw22 replied to the thread Low Flow Gas Buildup....
35% is about 1,200 rpm. That is very low flow.
45% is about 1500 rpm.
There is not a lot of energy difference between the two at low...
Jimrahbe replied to the thread Help deciding color for salt test Taylor K-1766.
End,
The salt test does not actually require a specific color... You stop the instant it changes from cloudy to some kind of salmon...
P
Parac replied to the thread Featured Stubborn algae afte SLAM.
- Use the FC/CYA chart to find the correct FC level. Stay at the high end or slightly above it to leave yourself some buffer. It's safe...
Newdude replied to the thread Is it safe to turn off skimmers during vacation?.
Goodness Mike, thats awesome !!! I could move the front doorbell that nobody ever uses to the back door if I ever went away. :salut:
Jimrahbe replied to the thread Low Flow Gas Buildup....
Guy,
On the surface, it just not sounds right to me... :scratch:
How sure are you it is 'gas' from the SWCG and not just a air...
PoolStored replied to the thread Low Flow Gas Buildup....
Your VSP has programs. Run your program on low for the day, and set one of the programs for 15 minutes at higher speed once a day to...
Mdragger88 replied to the thread Water is still cloudy after multiple treatments.
Hes in Minnesota so I suspect he will have his kit in a week or less 👍🏻
Rancho Cost-a-Lotta replied to the thread Is it safe to turn off skimmers during vacation?.
How do you fill water now?
When my parents were away from their home, I plumbed an automatic sprinkler valve to their fill line and...
D
dosmom replied to the thread Aquarite cell not generating.
will do, same to you.
Mdragger88 replied to the thread Used Pool Questions.
Ditto on everything phonedave said 🙌 You will also need a timer for the swcg & pump so you can ensure the swcg doesn’t run when the pump...
ajw22 replied to the thread Hayward Aquarite SWG Board (v1.58) on/off? PLEASE HELP!!!.
Try Stabiliant 22A in the connections.
PoolStored replied to the thread Sta-Rite System 3 S8M150 leaking.
Some great guidance:
Read this section on [Pump Runtimes Link--> Pump Basics - Further Reading]
Jimrahbe replied to the thread Is it safe to turn off skimmers during vacation?.
D,
I too can't understand shutting off the pool while you are gone for two weeks?? :scratch:
Tell us more..
Thanks,
Jim R.
D
Dave00 replied to the thread Aquarite cell not generating.
Let me know if you get this resolved as I have another thread going as I have the same exact issue.
Dave
Newdude replied to the thread Water is still cloudy after multiple treatments.
*assuming you get right on a kit being delivered. If its delayed for any reason, I'd use test strips to prove there was likely...
P
Parac replied to the thread Water Test 5-8-2025.
That's the general though process here. If you keep your chlorine at the correct levels (which is higher than pool store...
PoolStored replied to the thread Hi from Texas.
Dose higher, so that you are in range when you test.
mknauss replied to the thread Is it safe to turn off skimmers during vacation?.
Why are you going to turn off your make up water? You have a SWCG so setting the pool up to run each day, remain full, and generate...
T
Turbolag replied to the thread Sta-Rite System 3 S8M150 leaking.
Thanks for the tip on not lubing. Will clean it off next time I clean the cartridges. That is likely what created the sand accumulation...