Latest activity
PoolStored replied to the thread Mixed Instructions - VS Pump & SWG.
pH?
CYA?
S
hi all,
i am looking to have my pump ramp up to 100% speed when my pool is heating. The heater might only come on 2 hours a day but it...
D
dosmom replied to the thread Aquarite cell not generating.
Thanks so much. I was wondering about waiting for the click. I can do the test again and send results and will also look for corrosion.
J
JamesW replied to the thread Crosswind V flow rate concerns.
For 40 GPM at 100,000 btu/hr, the temp rise from inlet to outlet is only 5 degrees.
Even if you want to use spiraled tube, going larger...
ogdento replied to the thread Help Please - Aux Relays Not Working.
ok, so here are some transformer test steps... I've also added a link to Allen's additional transformer info from the wiki
The green...
HermanTX replied to the thread sealer for flagstone coping with SWC.
There was no noticeable visual difference. It was applied to the coping and to the waterline tiles - both of which are flagstone. Did...
C
C0d3Sp4c3 replied to the thread Aquarite cell not generating.
As indicated above in red, you need to wait for at least 10 seconds or wait until you hear the relay click before pushing the diagnostic...
B
Bperry replied to the thread Crosswind V flow rate concerns.
The spiraling creates turbulence in the fluid that ensures the water going through The tube gets mixed up as it’s traveling through much...
S
said530 replied to the thread Pool Finish and Color Viewing Room...PICTURES & details only please.
Pebble Sheen Cool Blue
J
JamesW replied to the thread Crosswind V flow rate concerns.
A larger diameter tube has more surface area and that causes better heat transfer.
A larger tube with the same surface area but smooth...
H
HarrisonHRG replied to the thread CC - Wont go down!.
UV AOP system arrived today, will fit it next week.
Last question: CYA
We run between 15-25 PPM CYA as a moderator to reduce the...
Looks like my iAqualink controller has died but wanted to check with any experts that may have tips to confirm.
Note I did read through...
N
NaCLTPool replied to the thread robot pool skimmer recommendations.
I have had the Betta SE Plus for almost a year now (got it on sale and added 3 year warranty), and have had no issues besides one of the...
setsailsoon replied to the thread Irrigation valve to control a water feature.
Welcome aboard J! I've used them in several places. They're like the watch "they take a beating and keep on ticking" . They're dirt...
E
Enzodast replied to the thread Mixed Instructions - VS Pump & SWG.
alright we're up and running! everything went pretty smoothly...electrician cost me a fortune but is what it is.
i ran my first ever...
J
I opened my pool yesterday and started my SLAM. I added more bleach than recommended but I figured that wouldn't hurt anything. I went...
M
mccool83 replied to the thread Lots of air in return line (video) need advice.
Sorry for delayed response. golf trip and out of town work. I think I've pinpointed it to either the spider gasket or the handle itself...
PoolStored replied to the thread Pool Store Water Analysis vs. Taylor Pro.
Taylor is your gold standard...check out the salt accuracy of Leslie's +/-800, or a range of 1600!!!!!
B
Bperry replied to the thread Crosswind V flow rate concerns.
The trouble with larger/smooth tube is that it doesn’t transfer heat as well. I’d expect then to have more than one tube if the tubing...
Newdude replied to the thread Pool Store Water Analysis vs. Taylor Pro.
We would send you to the pool store for free if they did better than Taylor. I have gotten exactly $0 from Taylor or TFT. Nate at...
setsailsoon replied to the thread Pool Store Water Analysis vs. Taylor Pro.
I'll give you the only answer I've seen to be true over and over and over. Taylor 1766 is the one to go by. Remember it's accuracy...
B
Bperry replied to the thread Pool Store Water Analysis vs. Taylor Pro.
You know the answer. 😉
PoolStored replied to the thread What is this?.
I concur. Pollen.
G
Giant655 replied to the thread Definitely NOT the capacitor.
*drumroll*
It was the switch! Got into the wiring box today. Loose wiring from quick connect use instead of side screws (I said what I...