Latest activity

EricSunshineState209 · Saturday at 6:19 PM

EricSunshineState209 · Saturday at 6:19 PM

EricSunshineState209 · Saturday at 6:19 PM

EricSunshineState209 · Saturday at 6:19 PM

EricSunshineState209 · Saturday at 6:19 PM

EricSunshineState209 · Saturday at 6:19 PM

morris.asherian · Saturday at 6:18 PM

I am hoping someone can assist with the model number on this pump. The pool company temporarily taped a generic cylinder cap (left side) but said this will not sustain long term as they could not find the original cap (maybe raccoons or something else took it away during the winter). The label reads Marathon Electric but also has a Hayward Products sticker. A lot is faded, but all I can see on the bottom right is the following number: 52X333027AA. Would appreciate any help here so I don’t have to replace the whole thing.

morris.asherian · Saturday at 6:18 PM

ChrisABS · Saturday at 6:16 PM

Configuration starts at pg 23. Your MSP Id is found under system info. https://hayward.com//media/akeneo_connector/asset_files/0/9/092472_RevL_b093.pdf

Boston_Pool · Saturday at 6:16 PM

ajw22 said:
I want a 3 HP pump for the spa jets to have strong jet pressure.

I would go with two 3HP Intelliflo3 pumps.

You think a 3HP is needed for a spa? The gets are powered by an air pump.

ajw22 · Saturday at 6:14 PM

I would like to be sympathetic but that is why we discourage the use of ORP sensors. They may work for a while and then eventually cause nothing but trouble. And our name is "Trouble Free Pools".

ChrisABS · Saturday at 6:14 PM

If you are comfortable in programming go and edit your configuration. Delete the cell and add it back.

mas985 · Saturday at 6:14 PM

The SuperPump VS has a maximum head of 65' so that is the maximum lift of the water, albeit at 0 GPM. In reality, 15' is nothing for a pump like this so no worries about priming even at RPM less than full speed.

ajw22 · Saturday at 6:13 PM

You still stuck?

@ChrisABS ever see this?

ajw22 · Saturday at 6:12 PM

Rocket J Squirrel said:
This ought to be a TFP motto. Of course, it's true of people, too.

What does?

ajw22 · Saturday at 6:11 PM

Boston_Pool said:
- Replace spa pump with 1.5hp Pentair Intelliflo VSP
- Replace pool pump with 3hp Pentair Intelliflo VSP

I want a 3 HP pump for the spa jets to have strong jet pressure.

I would go with two 3HP Intelliflo3 pumps.

Boston_Pool said:
- Install a AquaCal SQ225 to the left of the propane heater (or another heat pump -- open to other brands). I would like a bypass to select which heater I want to use (propane or heat pump) or bypass the heaters all together -- confirmed I have enough power. NOTE: heater on the right is for the spa

Aquacal is good. So is Built Right or Gulfstream.

Heat Pump Basics - Further Reading

www.troublefreepool.com

Boston_Pool said:
- Install CircuPool RJ-60 PLUS after the heaters (right now there is no space and the return pipe goes back under the shed)

Circupool SWG - Further Reading

www.troublefreepool.com

ajw22 · Saturday at 6:06 PM

Jandy also recommends the HP before a gas heater.

ajw22 · Saturday at 6:06 PM

ajw22 · Saturday at 6:06 PM

ajw22 · Saturday at 6:03 PM

Pentair recommends water flowing first through the Heat Pump and then the gas heater...

ajw22 · Saturday at 6:02 PM

ajw22 · Saturday at 5:58 PM

Welcome to TFP.

Maybe some pictures and a sketch of what you have in mind can get some ideas flowing.

ajw22 · Saturday at 5:56 PM

Welcome to TFP.

Maybe someone with a similar AGP will advise you.

@Mdragger88

ajw22 · Saturday at 5:55 PM

How you doing with the bearings?

Newdude · Saturday at 5:55 PM

jcrompton said:
all 3 tests must have been WRONG

If thats the case, welcome to not really believing digital testers.

jcrompton said:
I assumed

You're doing it again.

Get the 1766. Maybe the others start behaving and you can prove them occasionally going forward.

ajw22 · Saturday at 5:54 PM

TFP is a member supported 501(c)3 non-profit that is volunteer staffed and has no ads. Your support keeps the servers running so we can be here to help you. It would be helpful if you considered supporting TFP so we can be here to help in the future....

Become a TFP Supporter

Help Support TFP Trouble Free Pool is run by a dedicated group of volunteers that … Read more…

www.troublefreepool.com

ajw22 · Saturday at 5:53 PM

Sorry, no one appears to have advice for your situation.

I am not sure what you are looking for exists. If you find it, let us know.

timjs · Saturday at 5:52 PM

kimkats said:
What is holding the forms at the corner you have worked on? That looks like rebar but it might be sticks but still can hurt if someone falls on it. Yes I am a worry wort LOL

Oh those! Ground stakes. It never even occurred to me since they sit so low to the ground but you're right, it could be dangerous.

PoolStored · Saturday at 5:52 PM

jcrompton said:
how is the best way to measure salinity acurately??

TF Salt Bundle

tftestkits.net

Search

Latest activity

Latest activity

Show only:

IMG_8017.jpeg

IMG_8020.jpeg

IMG_8023.jpeg

IMG_8022.jpeg

IMG_8024.jpeg

IMG_8029.jpeg

Mystery Pool Pump Model

IMG_9558.jpeg

Hayward OmniLogic stuck at 75% chlorine output

Pool updates -- pumps, heat pump with LP heater, SWG

OmniLogic ORP reading low

Hayward OmniLogic stuck at 75% chlorine output

solar heater questions

Hayward OmniLogic stuck at 75% chlorine output

Renovate or remove an older fiberglass pool

Pool updates -- pumps, heat pump with LP heater, SWG

Heat Pump Basics - Further Reading

Circupool SWG - Further Reading

Pool updates -- pumps, heat pump with LP heater, SWG

1746310009615.png

1746309980900.png

Pool updates -- pumps, heat pump with LP heater, SWG

1746309756257.png

Bench construction for automatic pool cover

New pool setup

Replacing bearings on Speck pump - broken thru-bolt

Stuck on 2200 Salinity

Stuck on 2200 Salinity

Become a TFP Supporter

Recommendation for a robot vacuum that can run on a schedule unattended?

Florida Block-Pool Build

Stuck on 2200 Salinity

TF Salt Bundle

Filter