Latest activity
Jimrahbe replied to the thread Intellichor not doing its job.
Natalie,
The cell does not constantly monitor the salt level... It tests the salt at start up, and then every 12 hours.. That is what...
ajw22 replied to the thread IntelliCenter 3.002 - Heater not working.
You have to delete the incorrect heater entry and then ADD a new heater.
There is no way to modify the heater type.
P
Pas_pool replied to the thread New pool owner trying to understand test strip reading.
Thanks
yeah that's how I’ve been doing it too so far. I should go out and test soon to see how I did
ajw22 replied to the thread Intellichor not doing its job.
It is close enough if your cell is happy and generating.
There is no way to adjust the cell salt reading.
ajw22 replied to the thread New pool owner trying to understand test strip reading.
I live dangerously. I eyeball it.
32 oz is about 1/4 gallon. 64 oz is 1/2 gallon. I add it to the pool and test in 30 minutes and see...
Newdude replied to the thread CYA over 100 despite using liquid chlorine.
Can we get a full set of test results, including the diluted CYA test linked above ?
W
water0125 replied to the thread Intellichor not doing its job.
Using the Taylor salt test, I've now brought my salt up to 3200. However, my Pentair Screenlogic app is still reading 3750. Any ideas...
J
James L. replied to the thread Main filter pump breaker tripped.
Red and black wires with tape go to breaker.
Red and black wires that are not taped are from pump conduit.
White and yellow wires go to...
Ahultin replied to the thread IntelliCenter 3.002 - Heater not working.
History for me was fixed under 3.004
Under advanced installation settings , heaters , you select connected gas. It will only allow this...
J
James L. replied to the thread Main filter pump breaker tripped.
Relay Terminals left to right 1,2,3,4.
Term 1 black to breaker. Term 3 red to breaker.
Term 2 black is from conduit of main pump. Term...
P
Pas_pool replied to the thread New pool owner trying to understand test strip reading.
Thanks
K
knjpool posted the thread Adjusting AquaPure 1400 pcm salinity in Salt Water Chlorine Generators (SWG).
In reference to this old thread. They requested that i start a new one...
1
1poolman1 replied to the thread Main filter pump breaker tripped.
Terminals 1&3 should have power from the breaker, 2&4 to the equipment. That is the "standard" way. The way yours is works, but can get...
PoolStored replied to the thread CYA Zero.
Put the cya in a human sock and hang in front of a return.
Don’t put it in yet, post a full set of results first…FC CC pH TA CH
P
poolboyK replied to the thread Pressure Testing.
Just wanted to follow up!
B
BIG R replied to the thread CYA questions.
Thanks for the input. I'll keep an eye on it
thewolf56 replied to the thread Dolphin Active 30 Troubleshooting Tips Needed.
Just an update, but I ended up ordering the Active 60 from Marina. With the small discount on the Active 60 vs the M600 right now and...
K
knjpool replied to the thread Recalibrating Jandy Aquapure.
I see this is old, but I do the procedure and it shows the ppm as 3600. I try to adjust with arrows but the arrows do nothing. Follow...
J
James L. replied to the thread Main filter pump breaker tripped.
"Now, put the wires back as they were and disconnect the wires on terminals 2 and 4 of the relay that the breaker feeds." Terminals...
ogdento replied to the thread Help Please - Aux Relays Not Working.
I concur with Jim's idea that 4 bad relays is unlikely, so if your drivers are socketed correctly and your aux relays still don't work...
C
I have an above ground round hard side pool. Dimensions 18' by 52". 1 HP Hayward pump.
We purchased our property late August 2024...
PoolStored replied to the thread Tested my two fill water options with Taylor K-2006-SALT - thoughts?.
Just a sump in a bucket. 1/4 inch holes in the caps. Pipe on deck with shot bag to hold in place.
ogdento replied to the thread Help Please - Aux Relays Not Working.
if they're in backwards you're in good company, I've seen a bunch of boards where both chips were backwards, and a couple with just one...
