T
Latest activity Postings Media About
-
-
TTonyR68 replied to the thread INTELLICENTER WEB-CLIENT / MOBILE APP?.I selected option 1, but an option 4 (I use the web-client and mobile app for pool control) would have been a better choice. For me the...
-
TTonyR68 replied to the thread IntelliCenter 2.017 FW Update.@MyAZPool one additional item not mentioned: IntelliChlor Superchlorinate feature in both the Web Client and IntelliCenter2 App does not...
-
THi all…. I’ve rolled up your comments ref Firmware v2.017 from this and other threads and I am preparing to forward them to the...
-
TTonyR68 reacted to rstrouse's post in the thread Pentair IntelliCenter Pool Control Dashboard Instructional Guide with
Like.
Open an issue on the repo and include that capture. -
TTonyR68 reacted to ajw22's post in the thread Polaris PB4SQ Booster Pump leaking from body with Like.
The fix is to replace the housing.
-
TTonyR68 replied to the thread Polaris PB4SQ Booster Pump leaking from body.Same part number (R0723100). The new part had a manufacture date of October-22-2022.
-
TTonyR68 replied to the thread IntelliChem.Have you checked the ORP dosage limit? Normally it will not dose if that limit has been exceeded in a 24 hour period. The limit can be...
-
TTony, Thanks, I did not know that... :goodjob: I suspect they are just trying to tie the grounds together so that you don't end up...
-
TTonyR68 replied to the thread RS485 - Black wire?.Yup. Neither the MasterTemp or the IntelliChem call for the red wire. Both specifically say only black, green, yellow.
-
TTonyR68 replied to the thread RS485 - Black wire?.Ok. Thanks. So not needed for MasterTemp or IntelliChem and should not be stated as such in the installation manual.
-
TI had a service technician here yesterday on another issue. He advised that for the IntelliCenter RS485 connected devices only the green...
-
TTonyR68 replied to the thread Polaris PB4SQ Booster Pump leaking from body.It is quick. 5-10 minutes.
-
TTonyR68 reacted to Jimrahbe's post in the thread IntelliChem how to disconnect power to clean pH and ORP probes with Like.
k, Assuming it is powered by the load side of your pump/filter relay, the IntelliChem should have no power and all the lights and...
-
TTonyR68 replied to the thread IntelliChem how to disconnect power to clean pH and ORP probes.For me, the power to the IntelliChem is connected to the load side of the pool/spa pump power relay. I power off the pool/spa pump at...
-
TTonyR68 replied to the thread Pentair Magicstream Laminar Adjustments.Do you have a picture to show where it is touching. Normally the cover can be adjusted (toward the left or right) to avoid it being a...
-
-
Loading…
-
Loading…
-
Loading…