Poollife NST prime tablets

Jump to latest Follow Reply
coryg said:
I really thought that was a test for algae count
Click to expand...
It kinda is lol. If you pass you & the water is crystal clear then you don’t have algae- if you fail you do!
We don’t care exactly how much algae you have as it really doesn’t matter - having a little algae is no different from having a bunch. We want none!
 
  • Like
Reactions: Newdude
2 things:

1. I can’t seem to get to the post regarding the slam process. When clicking on the link posted, it brings me to the home page. When I click the tab, any tab, it brings me back to home page.

2. Yesterday I removed the frog cartridge and when pump was turned back on, the jets dumped what I believe is algae. QUESTION: I assume I have algae in the system that I was not able to scrub, how does one get that out?
 
coryg said:
can’t seem to get to the post regarding the slam process
Click to expand...
It's an occasional known issue. Clear your history and log back in.
coryg said:
Yesterday I removed the frog cartridge and when pump was turned back on, the jets dumped what I believe is algae.
Click to expand...
Hang tight I'm not familiar with these besides the headaches they cause.
 

Enjoying this content?

Support TFP with a donation.

Give Support
What’s confusing to me is inside the plumbing of the pool. This is a place where pressurized water containing a decent level of chlorine is flowing. Shouldn’t this alone break up the algae and force throughout pool to kill and eventually filter or vac up and remove?
 
Ditch the frog 🐸 - if you cannot remove the dispenser right now scrub it out.
Take a pic of one of the lights (if they are all the same) & we can help you with how to remove them.
Do they work?
 
Mdragger88 said:
Ditch the frog 🐸 - if you cannot remove the dispenser right now scrub it out.
Take a pic of one of the lights (if they are all the same) & we can help you with how to remove them.
Do they work?
Click to expand...

They have limited working ability. I do need to replace but are quite expensive.
 

Attachments

  • IMG_2725.jpeg
    IMG_2725.jpeg
    428.8 KB · Views: 10
Mdragger88 said:
Ditch the frog 🐸 - if you cannot remove the dispenser right now scrub it out.
Take a pic of one of the lights (if they are all the same) & we can help you with how to remove them.
Do they work?
Click to expand...

I was intending on leaving the dispenser until I change over to SWG. I assumed that is the location of the salt cell placement.
 
coryg said:
I was intending on leaving the dispenser until I change over to SWG. I assumed that is the location of the salt cell placement.
Click to expand...
More than likely it will be - so you can just scrub it out as best as possible for now (bottle brush etc)
Post a picture of your equipment pad to get a better recommendation on exactly where to put your salt water chlorine generator.
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply