Hi all,
I have a replacement Hayward pump (same model)for my above ground pool and need help to get this bad boy up and running. The previous owner glues the threads on the pipes so I can’t simply remove and place in new pump, going to Home Depot tell me what I need..
I’m new to pools and clueless on piping, I don’t have a problem removing the unions, the line at the 90 degree does not fully stop spilling water due to the main drain and I’m not sure if glue can be used on wet pipes.
Thanks in advance
Eddie
I have a replacement Hayward pump (same model)for my above ground pool and need help to get this bad boy up and running. The previous owner glues the threads on the pipes so I can’t simply remove and place in new pump, going to Home Depot tell me what I need..
I’m new to pools and clueless on piping, I don’t have a problem removing the unions, the line at the 90 degree does not fully stop spilling water due to the main drain and I’m not sure if glue can be used on wet pipes.
Thanks in advance
Eddie
Attachments
-
793D5C5A-2F9A-4D5F-AF61-E544478AF9AD.jpeg276.5 KB · Views: 18
-
C578E58F-D23D-46F4-9CBB-1A4588ED617B.jpeg293.8 KB · Views: 18
-
2548244A-6866-479F-BCA3-4FB18F307102.jpeg318.8 KB · Views: 18
-
F43F1D6C-06A3-4F5D-855F-9BFC831094BA.jpeg263.9 KB · Views: 16
-
50D579A0-E45E-4B90-966B-E7E299955270.jpeg280.7 KB · Views: 16
-
06EA34F4-78C8-4F73-A32F-7E07F8732342.jpeg585.8 KB · Views: 17
-
497152FA-CF75-4B99-AC56-F7C68CC08416.jpeg278.3 KB · Views: 16