Latest activity Postings Media About
-
-
markayash reacted to proavia's post in the thread Tuning IC60 Flow rate... input min to make it happy? with
Like.
Filter should be cleaned at about 25% above clean pressure. Run pump at max speed and note the clean pressure. If something doesn't... -
markayash replied to the thread Tuning IC60 Flow rate... input min to make it happy?.Like I joked with my kids when teaching them how to drive. “ pull up until you hit the wall then back up a little :)”
-
markayash reacted to Jimrahbe's post in the thread Tuning IC60 Flow rate... input min to make it happy? with Like.
Tomas, There is no magic number as every plumbing set up is different, Just reduce the speed until the Red flow light comes on. Then...
-
markayash replied to the thread Cya at 50, still losing 3-5ppm fc-water clear.That one big advantage, a SWG is providing chlorine all day and night if you want
-
Can you post a full set of test results from your TF-100 test kit. Your TA and FC show results not consistent with your test kit. Yes...
-
markayash replied to the thread Tuning IC60 Flow rate... input min to make it happy?.You can probably turn your pump down more if you want :) Glad you fixed it!
-
markayash reacted to tomas21's post in the thread Tuning IC60 Flow rate... input min to make it happy? with Like.
Issue solved.... Filter was filthy... now... running pump at 1750 getting almost 30gpm... filter pressure 10 psi running pump 2500...
-
markayash replied to the thread Tuning IC60 Flow rate... input min to make it happy?.I would bet your filter is dirty, my filter pressure is at 3 to 4 psi and goes through heater and then SWG it neither show low flow...
-
We do NOT recommend running your salt level higher then manufactures recommendations. Pentair's recommended ideal salt level for the...
-
markayash reacted to Rancho Cost-a-Lotta's post in the thread Can't Get Consistent Salt Measurements with Like.
Scroll down to Salt Test on the following page. It's a new addition. Pay close attention to the first note regarding the endpoint...
-
markayash replied to the thread Can't Get Consistent Salt Measurements.First don’t worry about it, all those measurements are within range. Most recommend 3000 to 4000. The best kit is the Taylor 1766 to...
-
Backwashing is maybe a 15 minute affair for me with the pump on and off 6 times for less then a minute. Even if the flow switch was...
-
markayash replied to the thread Water level decline.Hurricane Harvey wants to know what you did with the 35" he gave you in 2017 Let hope that never happens again :(
-
Thanks everyone. Seeing that everyone else is going through the same thing, I'll keep filling it back up. Maybe we'll get a hurricane...
-
I’m in Katy. I wish I had to add water only twice a month. You may have a leak who knows. But that evap rate sounds right to me. It’s...
-
-
Loading…
-
Loading…
-
Loading…