T
Latest activity Postings Media About
-
-
Ttrivetman replied to the thread Water line to coping grout cracked out..Fyi https://www.troublefreepool.com/threads/caulk-for-tile-line.209042/
-
Ttrivetman replied to the thread Water line to coping grout cracked out..Jay - ive had premature failure of grout in the same spot. Polyurethane caulk was recommended by ajw at the time and it’s only been a...
-
Ttrivetman replied to the thread SWG Chlorine Generation too low.Beta - I am right there with you. I added 80 lb salt yesterday morning and ran an ONCGain last night which gave me 1ppm FC gain for an...
-
Ttrivetman replied to the thread SWG Chlorine Generation too low.I don’t have the k1766. I picked up that both the drop test and test strips (aquarite) had similar margins of error, and went aquarite...
-
Ttrivetman replied to the thread SWG Chlorine Generation too low.MIT - I’ve got a very similar story with my Universal 55, installed this spring. My output is maybe 35% of what I was expecting...
-
Ttrivetman replied to the thread Pressure keep's dropping..Bg - I constantly get pine needles in my pump impeller which can drastically reduce flow and filter pressure. I can clean them out with...
-
Ttrivetman replied to the thread SWG ratings.Good question…and that’s something I was already going to ask Circupool. Heres the cell version display. I think it says t-15. I...
-
-
Ttrivetman replied to the thread SWG ratings.Yeah I am going to have to follow up with Circupool on this. I am just trying to get as much diagnosis done on my own before going down...
-
Ttrivetman replied to the thread SWG ratings.Has anybody ever done this sort of test to check that the cell actually is bubbling? I am doubtful it would tell me much especially as...
-
Ttrivetman replied to the thread SWG ratings.Hah! I was literally outside doing just that when this post hit! Voltage and current readings are right in the midpoints of the...
-
Ttrivetman replied to the thread SWG ratings.Agreed with those thoughts. And I have lost up to 1ppm overnight in the past when the waters been fine. If I was getting output of...
-
Ttrivetman replied to the thread SWG ratings.Ive done two overnight tests. One for a 6 hr run and the second for 8 hours. No reason to think the timer isn’t working right
-
Ttrivetman replied to the thread SWG ratings.A second overnight test confirmed the low output. 8 hour run at 100% raised FC 1.0. This is not going to keep up with chlorine demand...
-
-
-
Loading…
-
Loading…
-
Loading…
