I spoke with Jandy by email they have confirmed that it is possible, BUT wont give me instructions only dealers of their products....
Our existing handheld which was on our old controller is
Handheld 3.0 Blue Jandy PDA (Blue One)
The JBox has a V3.0 sticker the board says 4606.
When both the Jbox and the Aqualink WiFi box are connected to the controller either the Jbox will not respond or the Wifi module will go offline. The pool was controllable at one point using the remote and all programing showed however the wifi system dropped offline to RED in the app.
I would like to have BOTH the WIFI ability as well as a dedicated remote controller like the PDA. If guidance could be sent to me so that I can share it with the installer.
Our insurance company replaced the controller (electric pannel) to the new module since the circuitry was bad on the old controller. They installed an “Upgrade Kit” (The box says it’s a IQ30-RS) which helped solve the button issue, but the installer explained that you had to use the mobile app only and not the PDA and that it’s not possible to install the PDA.
Our existing handheld which was on our old controller is
Handheld 3.0 Blue Jandy PDA (Blue One)
The JBox has a V3.0 sticker the board says 4606.
When both the Jbox and the Aqualink WiFi box are connected to the controller either the Jbox will not respond or the Wifi module will go offline. The pool was controllable at one point using the remote and all programing showed however the wifi system dropped offline to RED in the app.
I would like to have BOTH the WIFI ability as well as a dedicated remote controller like the PDA. If guidance could be sent to me so that I can share it with the installer.
Our insurance company replaced the controller (electric pannel) to the new module since the circuitry was bad on the old controller. They installed an “Upgrade Kit” (The box says it’s a IQ30-RS) which helped solve the button issue, but the installer explained that you had to use the mobile app only and not the PDA and that it’s not possible to install the PDA.