I just bought intex 15x48 prism frame above ground frame. I used the filter twice without incident. The 3rd time I turned it on it made a loud churning noise for 20 seconds and then shut off. It hasn’t turned on since.
Unplug it, remove the filter if it has a filter cartridge- if its a sand filter remove the pump basket & check to be sure nothing is lodged in there anywhere - like pine needles or foreign objects near the impeller- if it looks good replace cartridge or basket & lid & unscrew the little doohickey on the topof thelid a little Until water comes out to then retighten. Try to run it again. You may have had air in it . If this works great ?? if not u may have a dud
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!