Filter pump won’t turn on Schedule/App

[Jimrahbe]

AA,

Since you have a VS pump you should change it to VS..

Note, when you do that, it will wipe out all your pump speeds and you will need to reenter them again.

This should fix your issue..

Thanks,

Jim R.

 

[AA_DFW]

Correct you are sir. Issue resolved.

I did as suggested and tested it 4x, everything is working as it should.

I think when the pool company was over last, they were playing with the settings. Since I wasn’t familiar enough with pumps, I didn’t realize that to be the issue.

One last question, I set the priming time as 1 minute. Is there any reason to set it longer?

Thank you again for your time and suggestions.

 

[Jimrahbe]

AA,


Not if it is priming in less than a minute..

Thanks,

Jim R.

 

[ezchief]

AA,

Since you have a VS pump you should change it to VS..

Note, when you do that, it will wipe out all your pump speeds and you will need to reenter them again.

This should fix your issue..

Thanks,

Jim R.

Good find Jim. That's what I love about this place. People like you.

 

[Jimrahbe]

@ezchief

I appreciate the thought, but in truth, it is Gold Supports like you that keep the lights on and allow me to have a place to hang out.

Thanks,

Jim R.