Discount salt has Cyclonic cleaner on sale if anybody wants one
- Thread starter markayash
- Start date
- Jul 21, 2013
- 65,691
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
If their claimed retail price can be trusted that’s one heck of a deal. Nice job Mark !! Do we have anybody that uses one ? From the description it sounds like they built a $519 skimmer sock. But hey, for once they are selling something that actually works so there is that !!
Mark,
Not knocking CircuPool, but I can't understand why anyone would add that product to a pool?? In my opinion it is just not needed.
If someone is too lazy to check/clean their pump's basket, they will be too lazy to check the Pre-Filter.
Thanks,
Jim R.
Not knocking CircuPool, but I can't understand why anyone would add that product to a pool?? In my opinion it is just not needed.
If someone is too lazy to check/clean their pump's basket, they will be too lazy to check the Pre-Filter.
Thanks,
Jim R.
I tried one years ago and didn’t help much but read a few post where people were asking about using it so wanted to share.
I think it would do better with sand and dirt. I have more tree junk which floats and seemed to go through it. It did catch a little dirt over time
I finally went to a bigger cartridge filter and dumped it
I finally went to a bigger cartridge filter and dumped it
Katodude
Silver Supporter
- Aug 22, 2017
- 3,006
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
So does it or does it not work. If it actually helps I would consider it for this reduced price.
Your in Fl so I think it would help if you get sand and dirt. Mine collected about 1" of dirt at the bottom but because I was wanting to catch tree junk it didn't help.
One problem I did have was I mounted at the output of my super pump and between the torque of it starting and stopping and the vibration it leaked at the seal a few times. But distance from the top to the filter was short so didn't allow any give. Plus the union was a very cheap quality.
They do make a mount so it sits like a filter if you have room..
Mine experience was probably 7 or 8 years ago so they probably better now
One problem I did have was I mounted at the output of my super pump and between the torque of it starting and stopping and the vibration it leaked at the seal a few times. But distance from the top to the filter was short so didn't allow any give. Plus the union was a very cheap quality.
They do make a mount so it sits like a filter if you have room..
Mine experience was probably 7 or 8 years ago so they probably better now
Similar threads
