Latest activity Postings Media Albums About
-
-
kimkats replied to the thread OB Fiberglass Pool in South Florida.SWEET on the passed inspection! Adding CYA if you are adding powder CYA mix a bit of it at a time in a bucket of water. Put some in a... -
Pipes are hooked up and under pressure today. Plumbing inspection in the morning.
-
kimkats reacted to Methuselah's post in the thread Warming Area Around Hot Tub Under Gazebo Curtains with
Haha.
The electrician is lazy and won't run more wire. He is old, tired, and lazy (me) ;) -
Well this failed. An inch of rain forecasted turned into almost 3 inches. Water pooled behind the dam and ran over into pool pulling top...
-
Trying something new tonight. I placed a garage door seal on the deck and then layer 4x4 over it to divert any water from coming from...
-
kimkats replied to the thread New Pool Build In Progress - IG Vinyl.Forget about "use". Just make it "pretty" by putting in hand made stepping stone with jewels and such on them or some pretty iron work...
-
Thanks. I thought the old iPhone mounted in the cabinet for access to both pool temp and Pool Math would get more applause. That's one...
-
So, What I've done this time is drained 2 inches or so below the return, and screwed a plug into the return so I don't have to...
-
Here ? I absolutely love the 3/8s crushed gravel /bluestone I used. It was $80 a yard at the sand/patio/stone supply, or 5X that...
-
kimkats reacted to Methuselah's post in the thread Warming Area Around Hot Tub Under Gazebo Curtains with Like.
That's what my better half suggested too, but then at 100 we are both hot after about 10 minutes into the 15 minute timed cycle, so for...
-
kimkats replied to the thread Featured The Ultimate Thermometer.When @Dirk does something he DOES it + some! Well done and great use of extra electronics. I wonder if you could put a 'cage" over the...
-
I got inspired to keep track of all this data, seein's how I went to so much trouble to gather it. So I first programmed my HA software...
-
Thanks all for you knowledge! I try to trust my PB but always go by the saying “Trust but verify” :) Looks like while I was gone last...
-
kimkats replied to the thread OB Fiberglass Pool in South Florida.That lay out looks good to me. Make sure to put unions on both sides of all of the equipment for ease to maintaince down the road.
-
kimkats replied to the thread Pool Bottom Finishing.Take and share a picture of what you are working with. I have some ideas but need to see what is what first. Close up and at a slight...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…