Search results

Yes the power to the intelliflo is controlled by the 20 minute timer. The pump is running when it gets power even though it is outside its schedule. There is no manual control of the pump happening. Think of the 20 minute switch as a breaker. I don’t have the model number off hand

I’ve got an intelliflo running spa jets. The jets are turned on by rotating a 20 minute switch. The customer wants the jets to not turn on after 10 pm. I set 1 schedule in the intelliflo from 8am-10pm. However when the switch is turned on after 10pm the jets still come on. Any ideas? The...

I am having a hard time figuring out how to wire an external stenner pump to the intellichem. This will be a chlorine only system. Any help would be appreiated! thanks

every jet does it though

I have a pool where the pressure rises about 20 psi when the return lines are on the spa. On most pools the pressure rises about 10 psi when the returns are on the spa. The other abnormality on this pool is that the jets in the spa will go in and out, there will be pressure on a jet and then...

yes that one

Okay so i dont have a picture of the control box but it only has three lights. pwr sensor and fillng. I can not pull the sensor up and out of the pipe, it gets stuck.

Ive got a 45 second video but its saying the file is to large for the server to process

OKay thanks. The trough is outside, and the sensor tube is inside the pump room. I would estimate that the sensor is located at about the same height as the trough.

I have a very small pool with an infinity edge that has a levolor autofill. The pool was recently drained and refilled. the trough was empty and so i stuck a hose in there to fill it up. After a few minutes i noticed that the trough wasnt filling up, i went over to the equipent and see water...

Where is that jumper? I am installing an intellicenter and the existing compool system used a 3 wire setup. Now nothing works

no iron in the water. I dont have before/after pics. The staining is a much lighter shade of blue than other areas of the surface

I had a customer have a valve acuator malfunction and there spa emptied overnight. He immediately filled it back up and noticed the spa was now very discolored. Any ideas on what would cause this?

Moved from here. Does anybody have a problem with more calcium flakes in the pool when the pool is covered the majority of the week?

Low maintenance and a $1000 budget, i would buy a 500lb sand filter and a prefilter cyclone.

Ok so you have 1 suction line and 2 return lines. Without more information its hard to tell what exactly is going on between the 2 return lines. Most likely you have a water feature that is activated when the black handle is pointed to the right, therefore diverting water to the 2 red ball...

first of all, get an intellipro and there wont be any plumbing involved in the install. If i was you i would call around to local pool service companies and ask how much they would sell you an intellipro for if you do the install. Offer to pay cash and you might get a better deal. If you buy...

Ive been there before and it is insanely frustrating. My recommendation is drain the pool, add plenty of wire pulling lube to the junction box side as well as the light niche side. It is also helpful to have a second person pushing the cord from the pool side as the other person is pulling...

Jandy LXI heater is not turning on. I tried to put it in service mode to bypass automation and see if the heater worked, but i was told this did not completely bypass the automation. How do i bypass the automation? Can i just unplug the communication cable from the heater? thank you!

Customer bought a house with a 40k gallon pool and the pool is green. Previous owner was using tab feeder and cya is at 300. I replaced 48 sq ft de filter with a 500lb sand filter. 2 days in and 14 gallons of chlorine later there’s been little improvement. Is backwashes and vacuuming to waste...

sorry this isn't for my pool that is in my description

Can i upgrade the current intellipro 2vst to a VS+SVRS by just changing the drives or does the entire unit need to be replaced?

This pool is 35k gallons, it is on a well, and has an automatic cover. Pool is flourescent green and has heavy orange mineral deposits on steps. Test results: CYA:10 FC : 1 CC: 1 TA: 280 PH: 7.6 CH: 500 I suspect that the orange deposits are from iron in the water. My question is, is the...

Have you cleaned the filter? The filter is very small. That may be decreasing the flow to the heater, slowing down the heating process. Could also play a role in not reaching temperature. Although you have a heat pump and I don't really know much about those

I would like to extend the amount of time between cartridge filter cleanings on my route. Many filters are undersized and for many customers its not an option to put in a properly sized filter. My two main ideas are enzymes and cyclone pre filters (1/4 the cost of upgrading filter). Keep in...

Is there a way to determine the actual ph from the acid/base demand test? For example if it takes 6 drops to get the ph down to 7.6 what is the ph? 8.0? 8.3?

this is basically how I maintain pools on my route in central California. It works just fine, but the cya does increase rapidly. "Wasting" some water each week via backwash or opening the filter drain plug will slow the pace of the increase. It's also an option to use cal hypo tablets. The...

Okay so if it was set up so that couldn't happen there would be no issue? Ive got one that when connected to the extension cord the s300 is stuck on quick clean mode, but everything else works fine. When connected directly to the outlet the quick clean button works. Could this be because I...

Does anybody know why Maytronics says not to use extension cords?