Latest activity
F
FloraCali replied to the thread Advice on coping and decking re-do?.
Thanks, I will try it, nothing to lose. We've also had very little rain this reason and I notice the rain helps keep it a bit cleaner.
ajw22 replied to the thread Easy touch and master temp heater connectivity.
Read Pentair Automation Systems - Further Reading
P
Pool Man Tom posted the thread Replacing Hayward SP723-E Ball Valves in Pumps, Filters, and Plumbing.
I want to replace both of these ball valves but not sure what type of connection ends to order and if there are adapters I need to...
ajw22 replied to the thread Sealing Coping Inside Fiberglass Pool?.
What are you thinking of sealing the gap with?
Better to stuff foam backer rod in the gap. It comes in various widths.
PoolStored replied to the thread Updating/Upgrading Pool Systems.
Organics in a pool, whether they are in the pool or trapped in the filter will consume HOCl. Doesn't matter where they are. The filter...
C
csuebele replied to the thread Service light on but no error codes.
WEllen, I got it working. It was the flue sensor. Some other issues, like the temp display not showing on the board, but at least the...
ajw22 replied to the thread No Water Flow Timeout FlowSensor - Can't clear this.
Failed flow switch.
C
ccocotas1 replied to the thread Easy touch and master temp heater connectivity.
Seems to be the correct temp.
ajw22 replied to the thread Sump Pump Under Solid Cover?.
Leaving a pump submerged in pool water that has salt and chlorine is hard on the pump.
Will he be able to recognize if the pump dies...
Texas Splash replied to the thread Sand in the pool!!! Intex pump.
Wow!
Texas Splash replied to the thread Draining Fiberglass Pool to Fix Main Drain Leak.
I'm going to tag @AQUA~HOLICS on your last set of questions to get feedback from someone in the field. Stand by.
JoyfulNoise replied to the thread Pool Patio Chipping.
Looks like the previous owner just took an old concrete deck and had it skim coated with a cement/sand(aggregate)/color mixture...
Newdude replied to the thread [SWG] I've been running my 2.6 HP pump at full speed for 10 hrs/day for years. Should I be using low speed for part of the day?.
Usually heaters need more flow too. But if low speed is accomplishing what you need done, its foolish to spend 10X (?) more on high...
M
mummer43 posted the thread No Water Flow Timeout FlowSensor - Can't clear this in Pumps, Filters, and Plumbing.
This error has popped up on my Omni Logic app and as of now everything seems to be working. I can't clear it from the app. Any ideas...
Draxus replied to the thread First time opening, floor cleaning system.
I bought a giant pair of channel lock pliers and got the plug out finally! Thanks for the suggestion @proavia
Should the flow be very...
duraleigh replied to the thread air leak repair.
Many folks have success running a garden hose over the suspect joint (pump running) while observing the bubbles in the pump basket...
M
Mayday replied to the thread [SWG] I've been running my 2.6 HP pump at full speed for 10 hrs/day for years. Should I be using low speed for part of the day?.
I don't get an error from the swg for low flow, but the way you are describing, it sounds like I should be running at low speed all the...
B
bjxds replied to the thread Sump Pump Under Solid Cover?.
That’s what I am trying to figure out. I was thinking if the pool needs to be pumped, he could just plug it in.
It would be great if I...
L
Liquid replied to the thread Draining Fiberglass Pool to Fix Main Drain Leak.
Thanks for the feedback. Given that I can see when the water level is below the pool I was a little less concerned about the upward...
B
The pool was installed last year.
When in the pool a gap can be seen under the coping where it sits on the top of the fiberglass pool...
P
PaulieR replied to the thread Sand in the pool!!! Intex pump.
Update: I ended up emptying it once again, but this time used a shop vac to do most of the work. Saved my back. Inspected the laterals...