Hi! We open my in gorund pool this summer to find the plugs out of the jet and at the bottom of the pool...ugh. When the pump is not running we do not lose any water! When we turn the pump on after about 15 minutes we start seeing water bubbling out of a drainage grate on my pool patio a way away from the pool.. After some research it seems like there must be a crack in the return pipe somewhere. We can not run the filter because it quickly loses inches of water and cannot keep a prime so my pool is very green. All the leak detection companies say they can't do a full inspection on the lines and the main drain unless the water is clear. We got advice from someone to run a temporary return pipe above ground just to get the pool started and clean.
Any advice on how to do this would be great... all the pool companies are too busy to come help right now and we are really missing the pool. Im looking to do the new plumbing myself
Any advice on how to do this would be great... all the pool companies are too busy to come help right now and we are really missing the pool. Im looking to do the new plumbing myself