spa water level

Aug 26, 2017
39
Houston, texas
while using my spa the water gradually goes down. inhave attached a picture of what it looked like when we were done using it. it refills when i swap it back to pool mode. what could be causing this?
 

Attachments

  • 4D1A2E38-032B-4E2A-BF68-15CF7CC77BC8.jpeg
    4D1A2E38-032B-4E2A-BF68-15CF7CC77BC8.jpeg
    608.1 KB · Views: 8
You must be returning some of the water to the pool when in Spa mode. Check your actuated return valve that it is fully closing off the pool return.
 
what does that look like?
Take a few pictures of your equipment pad. Focus on the return valving. Post pictures of it in Pool mode and one in Spa mode.
Do you use a Spillway circuit for the spa spillover or is that part of your Pool mode?
 
The left side pic is showing the pool return off (normally they put that puck feeder thing on the pool side). The right side pic shows the spa return off. In that picture it appears the valve handle is not parellel with the pipe.
 

Enjoying this content?

Support TFP with a donation.

Give Support
When you look at the handle that is on top of the actuator, you will see the tab that says OFF. The pipe that it is pointing at is OFF. So in the picture you posted that is on the left above, the tab OFF is pointed towards the Pool returns. So the water is being returned to the Spa. The picture on the right is opposite of that.

If that is not true, then there is something amiss with the handle on top of the actuator.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.