As per my pool information in my signature below, Imam currently using a jandy stealth 1hp pump for my circulation. I chose this size as the pump curve worked perfectly to match the elevation and gpm flow recommended for the solar panels on my roof. It has worked great these last 15 years (albeit with one motor and pump seal rebuild during that time. At the time, VS pumps were in their infancy so just stayed with basic single speed pump.
I recently reduced the solar panels on the roof to accommodate space for electrical solar and so flow rate is too high to work properly with the panels as they are now configured. Also would like to reduce the noise of the pump running and go to 24hr operation if possible. I have an rs8 iaqualink with all relays taken up for various pool and yard equipment.
Is it possible to add a jandy VS pump,with this configuration? I want it to be linked to the solar so when it comes on, the speed of,the pump increases the proper amount to get the flow and pressure required then return to a lower speed when the solar is off. If this is doable, what jandy pump model should I purchase? There seems to be 2 or 3 in the same category so confused which one to .choose
I recently reduced the solar panels on the roof to accommodate space for electrical solar and so flow rate is too high to work properly with the panels as they are now configured. Also would like to reduce the noise of the pump running and go to 24hr operation if possible. I have an rs8 iaqualink with all relays taken up for various pool and yard equipment.
Is it possible to add a jandy VS pump,with this configuration? I want it to be linked to the solar so when it comes on, the speed of,the pump increases the proper amount to get the flow and pressure required then return to a lower speed when the solar is off. If this is doable, what jandy pump model should I purchase? There seems to be 2 or 3 in the same category so confused which one to .choose