G
Latest activity Postings About
-
-
GGlad to hear you got it cleaned up 🧽 !
-
Gghall6292 replied to the thread Anyone rough bungie chord size for above ground pool cover to ground stakes?.I drain to about 4-5 inches below the skimmer and let the cover sit on the water, as well. It's held in place (just slightly snug, to...
-
Gghall6292 reacted to Mdragger88's post in the thread Anyone rough bungie chord size for above ground pool cover to ground stakes? with
Like.
If it is a solid cover (no mesh strip) when water/snow/ice collects it will pull on the walls/top rails if the middle of the cover is... -
GI hate the dot test….
-
GShade, full sun, cloudy sky, 4’ shop lights in the garage, never saw much difference in test results. +/- 10 ppm or so maybe.
-
GAssuming it’s working correctly, all heaters and coolers have a dead band associated with their thermostats. Typically it’s around 2°F...
-
GHeat pumps do exactly what the name implies, they only move BTUs, they do not generate heat like a gas heater does, so as the outdoor...
-
GI was able to get the part out. It did in fact unscrew.
-
Gghall6292 replied to the thread Pool Heater Cover or Not.I've always covered my heat pump, but also usually chase out mice and garter snakes once it's uncovered in the warmer days of late...
-
Gghall6292 replied to the thread Plug for return jet.I don't think that inner piece is pressed in. Usually it's threaded in and is removeable. If you can look inside, with the collar and...
-
GIf you're not comfortable and you screw up it'll cost to repair quite a bit more then paying someone to winterize for you. Make the...
-
GSunny, Not trying to put words into Dave's mouth, but we are all just holding our breath waiting for this discussion to go sideways...
-
Gghall6292 reacted to JoyfulNoise's post in the thread First time doing my own closing: Poly60 brands? with Like.
Too much of anything is never a good thing as I recently experienced with an old bottle of Baily’s Irish Crème … 🥴 However, as long as...
-
Gghall6292 reacted to Newdude's post in the thread First time doing my own closing: Poly60 brands? with Like.
With your 16k gallon pool, 4.5 gallons of 10% is SLAM level 28FC for the average SWG pool with a 70 CYA. So 3 gallons would put you...
-
Gghall6292 replied to the thread Hayward heat pump, not heating.Although we both have pretty much the same unit, I have found that there are very few of us on this site who own one. Most have...
-
-
Loading…
-
Loading…