On the path towards a warranty.

Heres the water results for the return

My taylor testing
FC 10.0
CC 0.0
PH 7.8
TA 110
CH 190
CYA 60
SALT 3200
TEMP 94
CSI .05

Pool store
FC 7.47
TC 7.47
PH 7.7
TA 102
CH 148
CYA 43
Iron 0
Copper .1
Phosphates 51
salt 2698
 
Pool store
FC 7.47
TC 7.47
PH 7.7
TA 102
CH 148
CYA 43
Iron 0
Copper .1
Phosphates 51
salt 2698
Never mention them again. They're the dumbest kid in class. I don't care he got 3 right last time, I'll never compare my answers to his. They won't make mine any more right and all it will do is make me question my A+ average answers.

Forget that guy. :)
 
Never mention them again. They're the dumbest kid in class. I don't care he got 3 right last time, I'll never compare my answers to his. They won't make mine any more right and all it will do is make me question my A+ average answers.

Forget that guy. :)
I agree.
 
Pool store
FC 7.47
TC 7.47
PH 7.7
TA 102
CH 148
CYA 43
Iron 0
Copper .1
Phosphates 51
salt 2698
I don't understand the magnetic attraction to the pool store.

The RJ-60+ is a beast. Handles my 30K G pool during summer at 15% 24/7. Great unit. Time to update your signature.
 

Enjoying this content?

Support TFP with a donation.

Give Support
@ 2.4, it'll produce 8750 lifetime FC, assuming 10k hours (industry standard). Again. If it does better, GREAT.

The 8750 FC is equivalent to 1215 jugs of 10% for you. :shock: I'd say this one is working.🤣
 
  • Like
Reactions: FlappyLipps
@ 2.4, it'll produce 8750 lifetime FC, assuming 10k hours (industry standard). Again. If it does better, GREAT.

The 8750 FC is equivalent to 1215 jugs of 10% for you. :shock: I'd say this one is working.🤣

Working good so far.
letting the FC maintain a few higher than needed as I dial run time in without stress.
While testing with the pureline I tested so much I used half my reagents to check FC,.
 
  • Like
Reactions: Newdude
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.