Latest activity Postings Media About
-
-
CT-Steven replied to the thread Intex SWG " why does this work!" Fixed the SWG error 91!.After 2 years and fiddling with the Intex SWG just to get it to work on any continual basis, I retired it and moved over to a Cirupool... -
CT-Steven replied to the thread How to connect fountain to Intex pool 😫.Found this for you:
-
CT-Steven replied to the thread Saltwater system.proavia I am only quoting what TFP has stated in the past. It has been noted that by the "MOD Squad" and "TFP Expert" SWCG at least 2x...
-
CT-Steven replied to the thread Saltwater system.an1versy is correct. A SWG needs to be 3x the water capacity of your pool. You can get by with 2x but the larger the less you have to...
-
CT-Steven replied to the thread Do I have a leak? Poor circulation and return jet not working.Do you have a pressure gauge? I know when I get close to 15-20psi it is time. When the pressure gets that high my return is vastly...
-
CT-Steven replied to the thread Do I have a leak? Poor circulation and return jet not working.When is the last time you backwashed and rinsed?
-
CT-Steven replied to the thread Elevated water return.I have a very similar setup. The return up like this will not "churn" up the water thus garbage will settle on the floor of the pool...
-
CT-Steven replied to the thread Foam cove on *outside* of Intex XTR.I used gutter guards from Home Depot. I have also seen others use pool noodles. Here is mine...
-
Ok, this is a post as a warning to others... After I moved my pump as I wanted to re-plumb the system, the electrical cord came up 6...
-
-
-
-
-
-
-
CT-Steven replied to the thread Intex 18x32 - Thoughts on hard pvc (or similar) plastic cover. Two 9x16 'sheets'..DIY anyone? https://www.ziptiedomes.com/
-
-
Loading…
-
Loading…
-
Loading…
