Eeek! Those reagents are likely quite expired. But hey, may as well play and compare to your new reagents when your kit comes in.
Well the last liner was installed by pros here :/, It was clearly wrong and they installed it anyway. It ripped after 1-2 months (accourding to the nieghbor), They also repaired the bottom, They used sand and grout over vermiculight for patches. I always take all the risks lol, that was the reason for changing the corners to make it easy for the liner maker, even though they said they could do it. (The corners were made upside down the last time). Whos fault no idea would I have paid them no. Now that is not saying that every pool company here is bad. I just dont know what one is the bad one, lol. Installing the liner I can handle it, I have taken the old one out and in so many times I have the grip of a gorilla now. I will take a picture of the liner corner with the pool corner so you can see what I am talking about.Never ordered a liner to know. I think the challenge to DIY a liner order direct from a manufacture if properly measuring and specifying all the dimensions of the pool. Whoever does the measurement and ordering takes the risk of an incorrect fit if the manufacture cuts it to the specifications. If you DIY and it does not fit you have no recourse.
Sounds like I just need to sit down and buy one..@ajw22 @jimmythegreek @borjis any input? Mine was easy...just pick out pattern then find best price.