Jim,
First, thanks! The suction of the pump is skimmer 1, skimmer 2, and main drain. The discharge is 3 2” runs each going to 2 returns for a total of 6 returns. They said we would control flows with eyeball size. Do you have a recommendation? Thanks again
Greg,
I think I would use it as is and see if you have any issues...
That said, normally Jandy valves are installed that allow you to control the suction from each skimmer.. This allows you have more suction on the far skimmer and less on the closer skimmer. Not a major issue, just something worth having..
The same thing applies to the Return side.. it would be handy to be able to adjust the return flow from the pad rather than having to replace eyeballs.. but again not a major issue.
I have just never seen a new pool build with so few valves. In the big picture, they do not cost that much. On the otherhand, in your set up.. they can't leak...
Thanks,
Jim R.