Latest activity Postings Media About
-
-
PoolBrews replied to the thread New build/quotes in central Florida - Opinions welcome!.One more thing - I would highly recommend that you don't go 3' on the shallow end. That is way to shallow. Mine goes from 4' - 5' and we... -
PoolBrews replied to the thread New build/quotes in central Florida - Opinions welcome!.Good catch - I mossed that (my spa is separate from my pool). As long as you: Have a separate feed to heat the pool vs the spa (a heat...
-
PoolBrews replied to the thread New build/quotes in central Florida - Opinions welcome!.Two things I see right off the bat - I would want a larger filter than a C200. I don't see the size of the Jandy filter, but for...
-
PoolBrews replied to the thread New build/quotes in central Florida - Opinions welcome!.I'm in central FL as well and just went through this process a little over 2 years ago! I had 6 builders out, and the eventual PB we...
-
PoolBrews replied to the thread Firmware update failure.It really depends on what you actually loaded. Your only option at this point is to reset the OmniLogic by turning it off at the...
-
PoolBrews replied to the thread Pool math not saving latest results.I would think the code in the app should initiate a refresh of data when the app is launched and prior to displaying data.
-
PoolBrews replied to the thread Pool math not saving latest results.On my android, it never shows the latest test results. It shows the results from the last time I used the app. I need to refresh the app...
-
PoolBrews replied to the thread hayward omnilogic 4.4.1 ??.Release notes for 4.4.0 have been released (In Ground Product Support | Support Center | Hayward Pool Products), but nothing for 4.4.1...
-
PoolBrews replied to the thread Omnilogic daily alarms. Pool company says these are normal?.Is priming turned on? That is an OmniLogic feature to ensure flow starts strong and the pump is primed when initially turning on. If...
-
PoolBrews replied to the thread Omnilogic daily alarms. Pool company says these are normal?.Normally, you should not be getting daily alarms unless there is actually an issue with your system. The only alarms most folks will get...
-
PoolBrews replied to the thread Above ground pool on concrete that has a slope?.Just a thought... perhaps you could create a perimeter by pouring a 6" collar, then filling the interior with gravel and then sand to...
-
PoolBrews replied to the thread Above ground pool on concrete that has a slope?.The only idea that makes sense long term is to pour a level portion of concrete over the existing slab to support the pool.
-
PoolBrews replied to the thread Disappointed in my new pool.That doesn't look crowded to me at all! I love the look! I would look at adding shade over the patio area by the pool. There are...
-
PoolBrews replied to the thread Omnilogic Firmware 4.3.When I have a question, I go to the Hayward site and fill out the form for technical support. They usually respond within a day. I have...
-
-
Loading…
-
Loading…
-
Loading…