I just put a pool in with 3 line voltage hayward color logic lights. is it possible to add a mini color logic light to my system and have all the lights synchronized together?
hayward color logic lights
- Thread starter pool nut
- Start date
- Jul 21, 2013
- 54,179
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
I think you are asking if you can have mix 120V Colorlogic lights and 12V Colorlogic lights and have them all color synchronized.
I believe the answer is yes. Maybe @1poolman1 can confirm.
Make sure you use a Hayward transformer or install a snubber in the transformer you use.
I think you are asking if you can have mix 120V Colorlogic lights and 12V Colorlogic lights and have them all color synchronized.
I believe the answer is yes. Maybe @1poolman1 can confirm.
Make sure you use a Hayward transformer or install a snubber in the transformer you use.
BMerrill
Gold Supporter
- Mar 8, 2021
- 361
- Pool Size
- 17860
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Turbo Cell (T-CELL-5)
It maybe possible to sync them. But staying synced would become difficult since the method of changing colors differs for each voltage system.
- Jul 21, 2013
- 54,179
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Yes. Hayward UCL lights have Colorlogic 4.0 mode, so once you get them into that mode, they will take the same commands.
BMerrill
Gold Supporter
- Mar 8, 2021
- 361
- Pool Size
- 17860
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Turbo Cell (T-CELL-5)
I stand corrected.
From the manual for the Colorlogic lights.
"Multiple Hayward ColorLogic LED lights may be operated independently, or they can be easily synchronized so they will all display the same colors and shows at the same time. For light synchronization, all lights must be wired to the same switch."
From the manual for the Colorlogic lights.
"Multiple Hayward ColorLogic LED lights may be operated independently, or they can be easily synchronized so they will all display the same colors and shows at the same time. For light synchronization, all lights must be wired to the same switch."
