www.troublefreepool.com
Quick question on your rehab of this spa: after removing the closed-cell insulation that was blown-in originally, in order to access and repair the cracks, what sort of insulation did you use to replace it? Looks like standard wall insulation. Nice work and thanks.Leaks fixed, insulation in, cabinet on.
View attachment 169528View attachment 169529View attachment 169530
I also noticed that this control has the pre-2009 temp override, and will heat to 108* (ut-4).
View attachment 169531
That's a selling point to the right buyer. It truly amazes me that people could want it that high, I keep mine at 102*.
So I know this thread is old but have a question for you, you said after it was done you added another 1/2 dose.. was that in the same water or a refill?@RDspaguy - just watched your video!
Congrats on the culmination of all your hard work!
I Have a couple questions...
Did u bring the tub up to temp & have it @ shock level during the purge?
Also I wonder if you could have still used a dab more Ahhsome to compensate for your hard water? As I usually get copious amounts of foam with minimum dosing for my volume & low ch water.
Also a tip for future purges- i use a fine mesh skim net to scoop the funk filled foam - it works pretty well as u aren’t “chasing” the funky bits & don’t have to touch them
Still need to wipe the sides as well but I find I don’t use so many paper towels.
Then when i have scooped most all the foam & it dissipates I then add another 1/2 dose & purge again. Sometimes the 1st purge comes out pretty clean but that second one - wowza! Here’s an example of one experience
Decontamination fc level- please advise!
I posted in another thread last night but decided to start my own thread as to not hi jack that one. Here’s what’s happened— 5/2/20: I wanted to point out something that happened as I went about my ahhsome flush. My water is 6mos old. This is the longest I’ve ever been on a h20 changeout. I...
I cannot really do you tube either, like you I am in the middle of nowhere.. I've a drone and have done some videos but the last one I put to Youtube was a 2 1/2 minute video, it took 53 hours to upload!!Well, the trouble is that my phone broke my 1.5 hours or so of video into 4 parts and I can't seem to put them back together to then edit out some of the most boring stuff (it's all boring). I also can't figure out how to edit out pieces in the middle, it seems to only let me cut off from the start or end, but not out of the middle. I have never used a video editor, and am at the end of my patience with the ones I have tried. Perhaps it is because they were free trials, I don't know. But I am throwing in the towel. You aren't missing out on much, I assure you.
I appreciate your interest. I'll try not to let it go to my head.
