We 100% are aware of the advice against this, have read back on posts here about it but these lousy brush and roller ball heads marketed for vinyl are just that. We want to roll too! But we notice that the YouTube poster hasn't updated and want to know who has tried this and are you sorry? That's all, we won't hold you responsible, promise!
I use one at pool opening in spring. it does tend to get sucked to the floor occasionally so you have to twist it to release the vacuum. It's okay, but i will probably not buy another one.
I use one at pool opening in spring. it does tend to get sucked to the floor occasionally so you have to twist it to release the vacuum. It's okay, but i will probably not buy another one.
If you look on Amazon, there are heads that will be better for vinyl and which have suction breaks built into them to release vacuum if they get stuck. I used the regular wheel version on my AB years ago and did pucker the liner in a spot with it once.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!