salt chlorinator systems

  1. B

    Replace entire system after 15 years?

    Our salt cell is done. We've had our system for 15 years. Its the Hayward with a t15 cell. Pool is 28,000 gallons. The prices of the cells right now are around $899 for Hayward or $500 for off brand. I can get a Circupool system for $1100. Should I go ahead and replace the entire system...
  2. P

    Jandy pro series truclear salt system display light is on but no info displayed

    Hey everyone, I hope this is something easy to fix. I noticed my salt system display to be lit, the light is on but the display is blank, I also notices there is no flow on the salt cell, which tells me is not chlorinating either. I have already tried to turn it off, by pressing the on button 6...
  3. L

    Pentair No Comm

    Having an issue with pentair system. Able to log in remotely and see things, unable to have an effect on the actual system. from the panel i'm able to change modes and have the valves turn, but no changes with the pumps. the pump settings in the panel appear to be correct when it comes to...
  4. B

    Intellichlor IC40 red and green flashing lights

    My intellichlor IC40 has red and green alternating flashing salt level lights low-good; a steady red light for flow. Just like in this video pulled from the web: There are many posts about this and I have had this condition before. Yes, I have had the pool chemicals tested and they are all ok...
  5. tonygret

    Was I Oversold

    Leslie's Sold me a Swimpure Extreme 40. Unfortunately for me, I didn't do my homework and didn't know the system was designed for pools "Up to 40,000 gallons". The problem is my pool is barely 8,000 gallons, and I am having trouble keeping the chlorine levels down. It started with a setting...
  6. Skoutariotis

    Confused

    IDK what’s going on… My SWG is acting up. At some point at 4200 it says too much salt, at 5000 it’s generating, at 5300 it’s generating, now it says too hi at 5300. SWG reading of 5300, I done my own test, reads under 3300. At 5300 it says generating, not super chlorinating, I have set at...
  7. E

    Saltwater system in hot tub.

    I’ve been a pool owner for years and at one point looked into converting my pool to saltwater. I wasn’t able to justify it at the time purely on an economical basis since the math did not work out when considering the payback period. I recognize that it’s a completely legitimate reason to...
  8. O

    Please help above ground salt water pool.

    Hey all! I have scoured the internet and have found no answers. I bought a home in October. It came with an above ground pool with a salt water filter. I know NOTHING about pools. The previous owners had drained the pool. There are a lot of trees so a ton of debris in the pool it has maybe a...
  9. H

    White flakes on pump

    We just converted to SWG fro uv ozone/chlorine pucks. We are about two weeks in and noticed these white flakes and what appears to be corrosion to our pump. Any idea what would cause this? Pool company says it’s normal and they don’t see any leaks. I’m not thinking this is normal.
  10. P

    New to pools, have not gotten good advice from Local Pool Store

    I am sure you get these newbie questions all the time, but I am stuck and the local pool store has been no help. The store opened the pool and installed a Jandy Salt System and Opened my pool. To say that the opening was botched was an understatement. It a long story about that and getting them...
  11. A

    Jandy Salt Cell - Pump Won't Reprime on Automatic Mode After Cleaning Salt Cell

    Hi, I just bought a house with a Jandy saltwater pool system, and I'm still learning the ropes. I recently cleaned the salt cell with a muriatic acid solution, as there was significant scaling. When I placed the cell back on the pump, however, the pump stopped priming on its own, i.e. when the...
  12. X

    Connect Salt System to Easytouch ?

    I have just upgraded from Compool to a Easytouch Upgrade Board ( Kit (P/N 521107) - For upgrading CP3xxx systems) I also have the wifi-kit (screenlogic 2) all setup and working great. can controll all with my phone now. I have an existing salt system that is woking perfectly : Question is : how...
  13. M

    Using salt water from a borehole with electrolysis to generate chlorene

    Hi - I have a borehole with salt water that I want to use for my pool at the coast. I am checking the ppm but it will be more than 4,000ppm. The pool is just under 25,000 glns. Is there a salt chlorinator system available that I can ship to Kenya that will remove unnecessary salt from the...