Search results

Model number??

So I make my own coffee at home the way I like it every time all the time. No lines, no how'd you like your coffee... When I travel it's still my coffee to my taste. A couple years back on a transatlantic flight I was well prepared with my coffee grinds already in the filter and had my pour over...

Just discovered this post but I'm not getting how the sparks got to the glove. As was said you must be lefty and holding the handle which I get. I think the guard for the wheel should have been oriented in such a way that the sparks take off in a forward direction which in your case was clearly...

Your local nursery should be able to help you to figure out what and how many at what spacing.....

That's vinyl but TFP clear it is.

Just to add to ^^ keep the test going as it'll start turning pink again on its own and you want to see if the CC changes the solution not the time.

I don't see the kosher menu

Besides they are always fresh and current whereas on Amazon you have no idea where it sat for how long it sat and then get some erroneous results that will throw you on a loop.

No Tf-100 either

I have pumps of different flavors. My last recently purchased pump is a 3" effluent water gasoline pump to rid a pool of its contents in short order.

Another method I do when I vac the pool with a 42' hose is to connect the hose end to the vac head and the pole, drop it in the water. Take the other end of the hose and put it in front of a working return jet and it'll blow out all the air towards the vac head. When the bubbles stop you know...

Happy and healthy NEW YEARS to all.

I'm in full agreement with going the route you chose but I'd consider a mixing valve setup right above the tank which makes it most efficient by mixing the water to a set temp and sending that temp out throughout the home. Obviously the temp you chose is a little hotter then you can tolerate...

Correct you are as my high efficiency boiler now vents out with dedicated pvc of sorts.

I had a tankless for close to 12 years and at the time the only vent pipe was a double walled stainless steel with dedicated gaskets and clamps which can be costly. Tankless heaters are usually side wall vented and need the double wall vent pipe.

Good point, I always had a whole house standby automatic generator so it wasn't an issue but can see that being a problem.

As far as thankless heaters I had one for 10+ years until I went with high efficiency boiler system for the whole house so at the time I switched to indirect hot water. One tip many don't know about is to install a mixing valve right at the output to the hot water tank so there's no way to...

Yeh just remember to over chloinate with LC before to compensate for some of the bio left behind when the party's over and then some more when it's over, this way you're safe all around.

If you want to speed the gasket cleaning you can pause the cycle mid point, open door and pull back the the gasket where the nasties hide take a cup full from the drum pour it in there then with a medium soft bristle brush work it a bit. That's what I did.

I could see it working even in a TFP hot tub but poolwise for our TFP clear pools it aint going to anything because there's nothing there. That's for the pool store buff that will try anything they see. @JoyfulNoise beat me to it again

My front loader never smelled cuz I keep the door open all the time but the bio gunk, that was my issue. Now after there is a residual smell eventhough I used the machine for laundry but maybe it woke up some stuff so I'll let slide for a bit to see if it changes.

I highly recommend this stuff. So I'm here to report I used the hot tub jet cleaner in my front loader and that stuff works fantastic although I ran it several cycles because this has been going on for years till I figured out what the heck it was. I had this bio garbage mainly in the...

@Ahhsomeguy So can I use the washer/dishwasher cleaner in hot tubs or is that a no no.

You should at minimum grab a sample before leaving and test it yourself when you get home. Let us know what isn't in there please.

Heyeng Was just looking through your media and spotted your equipment pad picture with the circupool SWCG on the heater output which is correct but why is the flow switch in front of it not being used but instead you have it on your accessory/feature pump which to me isn't right. If you are to...

Hey, before I came to TFP you could've fooled me too but not anymore. My wife always tells me to keep my mouth shut when we go to some friends or family with a pool. Once I felt I need to wash my hands after handling a water sample and the guy says to me "you see I gave up the pool guy and got...

Yo, Was just peaking at your poolmath log to see the levels but your FC in the log of late is missing and the few before are too low. Get the level up where it should be before you get a surprise. Also no mention of the CC and CYA level.

He's basically telling you fire me and follow TFP

leave it @87 and I'll be right over :love:

Newdude, You posted at 5:20 pm but the Monday am cubical still has the pills. I think another present is in order here too.;)