Search results

Why does it seem like the air pipe is too tall for the filter?

It’s been working fine. Is it urgent? Can I just wait until it doesn’t work? Any thoughts on the question I asked?

Got it out. Can someone explain to me (in detail-I’ve never done this stuff before) what to do and how to reinstall. Where do I put the Teflon tape and lube? Thanks so much.

It’s loose. It doesn’t go any further. Just spins around. The sensor feels pretty stuck in. I’m nervous to pull in the wires too hard…

Definitely leaking from the bottom. Here is where I am so far. Having trouble getting the top piece off any further and am trying to be super careful.

Thanks. Should the sock be loose at the end or should I pull it all the way down.

Would it be possible to glue these together or I need to replace?

Two questions. The O ring for the stand pipe in my filter is cracked. Needs replacement? And the air vent hose is cracked but still stands pretty straight. Does that also need replacement? Thanks

Thanks. Here’s the full story. Pressure was going up quickly before I took it apart. I am leaving for the weekend in a few hours. I don’t want to leave the water stale for two days. And I’m nervous to let the filter run, maybe there is an algae issue.

Open meaning being cleaned. Will recirculate work safely?

How do I add chlorine while I am cleaning my filter. Can I run the pump?

Should I clean the cartridges first? Are there any instructions here how to do that?

I passed the overnight test within .5

It’s a Hayward de 6020.

I assume it must be an algae issue. But I’m not sure of the best way to proceed.

I did a quick backwash and rinse. Water was very clear pretty quickly. Pressure is now 18 psi. Should I clean the inside of the filter? Any instructions on how much de to put back in?

It was done at the end of last pool season

Filter pressure has risen to 24. Should I turn it off until I can backwash?

If the issue is related to algae, would I slam first and then backwash?

My current filter pressure is 23 psi. (Hayward progrid de filter) I’m not sure if I need to backwash. I don’t remember the usual pressure but when I opened my pool it was quite dirty (I hadn’t opened at all Last summer) and maybe it already needs a backwash. Please advise. Thanks.

Is this it? Thanks