Search results

So do you think the Frankenplug would work for me?

Sorry Texas Splash😏. I didn’t mention that it did leak around the broken fitting. That is main reason I need to fix it. Water level went below broken return within 2 days.

Last winter when I was closing my fiberglass pool I was threading a pvc pipe into return wing and broke the trim ring around it. Is there any way to use epoxy or some sort of silicone to fasten this back or will I need to cut my concrete and access the plumbing from the back side. First picture...

If Dolphin S200 and Active20 and pentair Warrior SE are stated as being the same here on TFP. why do the range in price from $699 to $899? (Priced on Marina Pools Website)

Chalky below water line. Fine on top 10-12 inches.

Shell seems to be solid. In your opinion 😉.... the Robot cleaner(I was thinking of purchasing the Warrior SE) with the fine filters should trap this residue off of floor.

I have a 25 year old 13x32 white fiberglass pool. Every year my floor and sidewalls have the chalky substance. Water is crystal clear until swimmers get in and stir the floor up. A few months into the swim season and backwashing several times (water looks like milk when backwashing!). It’s not...

I just did that in pool math. You are right ( my wife loves to hear me say that). LOL!! Sounds great Mknauss. I was hoping to just be able to run my pump a few hours a day instead of 24-7. Thanks for your help and quick replies. Maybe oneday I can pay this forward. Thanks again.

I can run whatever will be best. I was going to trial and error with that after I’ve go a good grip on chemistry of my water, which I think I’m about there? had 3 different pools and only ran them 24-7. Had pool people maintain my pool. I’ve since retired and wanted to fiddle with this myself.

What should I set my IC 40 on overnight. Indiana 60 degrees I will probably leave cover open

What did I do wrong with that calculator? and do you think 2 gal of 10% of sodium hypochlorite will do

Here is my calculator results. I only figured going up to 3 FC then go from ther

IC40 was off for 3 days. tests today FC .5 CC .5 PH 7.2 TA 100 CH 250 CYA 60 Salt 3000 nobody swimming. My question is if I run my IC40 100% overnight will I be ok or should I add some liquid. SWGCalculator says 51 hrs to get to FC 3 with no loss.

Hello and thanks everyon for you help. I really appreciate this forum as I am learning all this pool busines. New house with pool that I just opened here in Indiana a few weeks ago. Just replaced the Intellichlor IC 40 which was bad. Now pump is leaking. I guess a new seal kit is next on my...

pentair Superflo leaking water somewhere on bottom side. Pad, pump sits on stays wet. Pump has a hard time priming and when it does finally start a lot of air in volute. I can hear air in sand filter and lots of air bubbles in my return jets. Would a bad seal kit do this or would you think my...

I recieved my new flow sensor and installed it today just for shi#$ and giggles. Same lights not working etc..so now Ihave a spare flow sensor for parts? I also checked the date of manufacturing on bottom while I was messing with it. It was new in 01/2016 so 3 years is not bad I guess. I know...

Yes Jim, but your cell was used up 100%. This one just shows 20% usage. I will look at date tomorrow when I Flip it over. Maybe it’s older than I think. when I bought this house last fall all correct lights were on and green. Removed it for the winter and hasn’t worked since.

Also I see some units have 5 % lights 20-40-60-80-100 and some units have same lights with 1% increments above each light So you can fine tune output in 1-2-3-4-5 % increments is this the newer model?

Any suggestions on best place to purchase? Thanks for all your help !!

Any other ideas before I order a new cell?

nothing at all. Just red salt light and all 5 percentage lights

ok. No other lights have ever came on. When I start it red Green railroad light for about 5 min along with all 5 percentage lights on solid. After that.... red salt light and all 5 percentage lights on solid.

New to pool And Intellichlor IC40. Acid washed cell before I did anything. (1 part acid 5 parts water) Installed and when running it would red-green-re-green etc....salt. All 5 lights on 100 % on. That’s all. I checked salt using test strips twice in a 3 day period and both showed 5.8 which is...

I have owned 4 different homes with pools. 2 I had installed and 2 already installed. My current home which is the home which had pool already installed has a 13x32 fiberglass pool with the Intellichlor IC40, Hayward sand filter, Raypak 156 Gas Heater and a Pentair Superflo pump. I am retired...