Latest activity Postings Media About
-
-
I'll be honest, I only add items to my cart on Amazon, if it is a sold by and ships by Amazon. I do this mainly because if I want to... -
borjis replied to the thread Is the hayward t-15 cell obsolete?.Ya send them the link to it say, here's the replacement I need.
-
Get a specialized leak detection company to come out and find what’s leaking. Don’t hire the original place anymore, they obviously...
-
borjis reacted to ajw22's post in the thread Fuse Boxes vs. Breaker Boxes for Pump and Heater... with
Like.
Sure Poolman and I will meet at the bar tonight and send you minutes of the meeting. If NEC does not allow SWG and pump on the same... -
borjis reacted to PoolStored's post in the thread Fuse Boxes vs. Breaker Boxes for Pump and Heater... with Like.
I'll do that unless someone else shows up. I think the best thing to do is a modified Option 3 GFCI breaker in the panel ------...
-
I had this dreaded malfunction a little over a year ago on the same heater. It was about $700 to repair and we went ahead and pulled the...
-
I would not put $800.00 into a 10+ year old heater. "10+" might be 10 years or 15 or 20 years, so I have to assume closer to 20 years...
-
How much for the boards? What is the heater serial number or manufacturing date? Pictures of the heater and the heater label from...
-
borjis replied to the thread Help identifying cause for cracking in new plaster.Waiting for an expert to chime in but that doesn't seem right and I would not sign any paperwork that it's ok as is.
-
It's not a bond wire, it is a supplemental ground. Bonds and grounds are not intentionally connected, but they will connect in multiple...
-
borjis replied to the thread Is my pool light properly bonded?.That's pretty much impossible for a pump motor that's both grounded & bonded. Canada code has bonding to the sub panel ground.
-
Think your yard isn't all it could be? Envious of others' pools, or landscaping? Wishing you had more time to make everything "just so?"...
-
borjis replied to the thread Skimmer Gurgling.First thought, try adding more water. It seems like it might not be high enough. Sometimes skimmers (like mine) need a bit more than...
-
borjis reacted to Jimrahbe's post in the thread Robot Becoming Sentient? Climbs on Bench and Quits with Like.
John, I also doubt that the robot is bad. I suspect once it gets on the bench it thinks it is out of the water and shuts off. I can't...
-
borjis replied to the thread Up against the wall.You might consider a 2 speed motor replacement. I wanted a v-green but the control panel is too wide to fit my cramped equipment shed...
-
-
Loading…
-
Loading…
-
Loading…