Search results

You can see my pool in my profile pic. I have two 2" outlets that come straight from a 2hp pump that basically pushes the top layer towards the skimmer at the deep end of the pool. There is on all the way on the bottom left corner, and another on the right side a bit past where the shallow steps...

It's no more than 4 years old. Based on searches i have done, that seems to be the threshold for this dreaded error 10. From my searches, most posts are years old. I was just wondering if there was any new info on this error? The cleaners propellor starts and runs for about 2-3 seconds when any...

Is anyone willing to sell me an old non-working t-cell, just for the shell? Please message me. Im not a natural hagler, please give me a fair price and i will accept it and pay quickly :) Shipped to 32137 Yep - i was an idiot and simply threw out my old one many years ago. I always end up...

I tried to use some hydrochloric acid on the pool floor. This is in the deep end, so got one of those sticks with the acid holder on the end. Didn’t work. It looks almost like dirt. But it’s not. It won’t come out no matter what I have tried so far.

I sprung a leak and need to redo some plumbing. I need to replace the 2” capped tee/union assembly that came with the 8 port caretaker99 system. I can’t find this part online anywhere, does anyone know where I can get a replacement? Honestly not even sure what this capped union is used for -...

I’m redoing some plumbing for my equipment. I’m not sure about which check valves to use. I’m adding a check valve in front of each filter for my pool/spa. Can I use the regular type of in line check valves sold in hardware stores? Or should I use the jandy type of valve with a flapper? Or...

I am following this plumbing diagram for my dual pool/spa setup with spillover and a shared heater. On a Hayward prologic system. This diagram shows 3 valves. What is the purpose for valves 1 and 2 exactly? Is it a trap on each loop to relief pressure from the heater if needed? Does anyone...

I just replaced my old aqualogic for a prologic. I am having trouble understanding how to do the proper setup for automation of my system utilizing the automatic valves. How would you set it up? I have a pool/spa spillover setup. Dual system, dual pump, dual filter, single heater. I would...

Can anyone tell me what these connectors are for next to the raised spa? Circled in red.

I have a fitting for my spa that broke. It’s called a carousel rotojet. Searching for it came up with nada. It’s no longer made and available as far as I can find. Does anyone know what part I can replace it with? Seems whatever I need to fix on my pool it’s something that is no longer made or...

I have narrowed it down to my prologic board. Seems whenever i run the power to the board on it trips my GFCI breaker which is powering my pool lights. Is there some common fault i am missing? I am searching for where the prologic board is causing the GFCI to trip, but having no luck yet. I...

Im fairly new to this automation system. I just updated my aqualogic to a prologic with a PS8 display. Most likely in a few years ill update it again to a better/smarter automation system. But for now the prologic is leaps and bounds ahead of my old aqualogic. My question is about valve...

I am working on fixing a bunch of small leaks at my pool/spa equipment and trying to simplify my crazy plumbing which i inherited from the PO. The plumbing to the heater is troubling me and i am not sure if its necessary to keep it the way it is. I am not sure if its required to have a valve to...

I have a STA-RITE MAX-E Therm 400k BTU LP heater. I am not sure if i wired it up correctly. It is turning on OK and is heating my spa OK. But i am not sure its working as intended with the prologic. The heater is constantly turning off and on while heating the water. Water gets nice and hot in...

Just curious if its just my luck or this is the way it is now. I called Hayward a few times to look for some support since i recently changed my main board from a MAIN to a PRO. From the decommissioned aqualogic to the prologic. I ran into a few issues and was hoping for their support. When i...

I just changed an aqualogic to prologic. Everything works great except for my lights. I have the colorlogic 2.5 lights. What happens is when I turn the lights on I get a nice blue light and in about 5 seconds the light goes off. And it does not turn on again right away. Maybe after some time it...

I just recently replaced my really old aqualogic to an also old but newer prologic. My setup is like this: My Pool/Spa are connected. My spa has an overflow to my pool. I have a caretaker99 in ground cleaning system. This turns on my spa overflow every 10 minutes or so for a minute. My spa has...

Hi all! I just replaced by board with a PCB-GLX-PRO and installed a AQL2-BASE-RF. How would i know if the antenna is actually working? All ive done is plugged it in. Not sure if i need to do something else with teaching or frequency. I have tried to teach the aqua connect and its not working...

Hi All!! So my pool equipment is currently controlled by a GLX-PCB-MAIN board. I am upgrading this to a GLX-PCB-PRO board with the latest revision. I also am adding in a AQ-CO-HOMENET. For smarter controls and hopefully some alerting capability. Not quite sure what all it can do yet but looking...

Has anyone ever repaired the screen on their display unit? I have a Glx-local-PS4 and the small led display has stopped working. Usually I try to fix things before I buy replacements. Does anyone know that led display part Number used in this unit? Is it replaceable? another question as well -...

I have a inground pool with a Polaris 8 port in ground cleaning system. When replacing the Hayward filter I am trying to use the top screw to vent all air out from each port as it cycles. Seems no matter what I do there is always air. I have tried venting for about 5 minutes. Is this normal...

I just recently got the ultraflex In-ground system working. Now I can figure out how to get my skimmer to work with it. Whenever I switch the jandy valve to the position for the skimmer the pool pump stops pumping. Pressure goes to 0 on the filter and the in-ground cleaning system stops...

I have the 8 port ultraflex cleaning system. Has not worked properly since i have owned my house. Its about 10 years old now. At first it would only turn on when i did a power cycle by switching all breakers off/on. However it would not cycle zones, it just popped up one zone, then stopped...

The heater is only about a year old. No warranty since I bought it second hand (craigslist) but new still in the box. The person selling it thought it would run off of the small grill LP tanks. He did not have a large gas supply so never was able to use it. I had to LOL when he told me that...

I have this remote. It's crazy expensive. The seals for the screws broke when I had to open it to replace the batteries. Anyone know what seals I can replace them with? They are tiny and brittle, I can't be the only one this has happened to. I'm also wondering why these remotes are so...

I just got a new pool heater to replace my old rusted broken one. Is been down for almost a year now. The new heater is a completely different brand and I was hoping to possibly get a bit of installation advice and tips. I have a Hayward aqua plus pro logic control board which everything goes...

All the sudden my main pool pump stopped working. It's making a clicking noise every few seconds. Does this indicate some sort of common pump failure? Something fixable maybe? My first guess would be a baring is spent, but I'm no pro. Could also be a bad impeller, capacitor. I just don't know...

My pump is a model usn1202 Part 7-193687-02. It's a 2 1/2 hp spa pump, around 7 years old. It was working just fine yesterday. Today I turned it off and on in quick succession by accident and it wouldn't start again after that. Now I'm just getting a humming noise and the breaker trips after...

I just bought my first house a few months ago in the Central Florida area. Comes with a totally beautiful in-ground pool/spa. Its also a very complex system which I am still learning how to use and control fully. I noticed the other day that when the spa filter gets turned on sometimes it will...