Search results

So.... My Intelliflo VSF is blowing the lid off of the pump, I am almost positive that this is during when the booster pump starts creepy. The combination has been working prior to this with no issues. Any thoughts, the google machine did not provide any insight. .

Moved from here. So... Having a similar problem. Heater will turn on, 128, r13, then displays correct temperature. Will display service system light then start to heat. Heats for a while then shuts down, service system led lights again, then goes away, and heater starts. Rinse, repeat. Thoughts?

My spa seems to turn on the heater whenever the water temp hits below 40, the set point is 40, I can't seem to go lower on that on temperature. I leave my pump running 24x7x365. Is there a way to disable this?

Having a party on Jan 1. Anticipated water temp will be 41 degrees..... I am thinking about heating the Pool to about 83. How many hours (20K Pool) should I plan on to reach the temperature? Expected air temp will be 25 degrees

Been without power to pool equipment for about a week. It has not been 32 (or colder) for more than an hour. I will have power restored tomorrow afternoon (thank God) any damage potential? Anything I should do to minimize re-start?

Of course the genius pool builder did not provide enough electrical slack to change the light with a full spa and need to drop the water level a bit. What is the correct process.... Nothing super clear at this point.. Pic of equip below.

Well... The local Costco has stopped carrying the 3 packs of 8.25 and any other bleach for that matter and only carry the Clorox line of pool products... Ughhh. Anyone know anywhere locally that sells the 8.25 in the 3 Pack? Close to Northpark is preferred.:D

Leaving the heat and heading to the mountains for 11 days. What are the best options minus someone coming over and tending to the pool? The pool seems to be eating chlorine and want to ensure the occasional user will be in a balanced pool.;)

Seems as thought the pool is sucking down about .5-.75 gallons of 8% Chlorox every day... and I am wondering is the normal due to UV? PH does vary between 7.2-8.0 and add Muriatic Acid about twice a week. Thoughts?? FC-4.8 PH 7.6 TA-105 CH-250 CYA-40

It seems as everything I need is controlled via ScreenLogic, minus my spillway it is manual. I am guessing I need to replace the manual one with to one with an actuator and wiring... Is this correct? Image is the current valve. What do I need to order and how hard is it to change out?

Everything else seems to be balanced, but PH seems to rise and FC drop after a few days of balance- Is this normal or am d I being overly cautious? Today, after a few days of perfection, FC 3, PH 7.6 I have the following. FC-2 TA-90 CYA-35 PH-8.0 CH-290

Heating the Spa tonight, love the cold weather and the pump is sort of squeaking, not sure why? Thoughts? Water feature is also not pumping anything out. What is even more odd, is that it seemed to be louder once the heater was turned on

All of a sudden FC and PH has dropped. I added the appropriate Chlorine and Borax, still at the same level, 7.0PH and 1.8 FC, TA 110, CH 300. Any thoughts?

Taylor k-2006 Test kit- FC- 3.6 PH 7.0 TA-120 Can't get CYA to measure. Thoughts?

Just started filling pool after an incredibly challenging build because of weather, contractors, God Hating me:D, and the general awesomeness of the experience. After filling started noticed one area near the jets was extremely wet, thought it was just the spraying of the deck and cleaning...

Pool Builder is recommending Tahoe Blue, the wife and I like Midnight Blue, living in Texas, the pool builder said the pool will heat faster with the MidNight Blue (Bad for us). Thoughts?

Obviously new here. Just starting the pool, excavation and forming is complete. Have looked at several surfaces and the pool designer/builder is recommending a Stone Scrape Finish- The builder is touting this as superior finish requiring less maintenace (brushing) and it does look good when...