B,
The AC power for the Power Center would come from the load side of the Pump/Filter relay, which is the one in the upper left of the cabinet.
You also will need to connect the com port (J20) on the main EasyTouch board to the com port inside the Power Center.
Doing these two things makes sure the power center only get AC power when the IntelliFlo pump is running, and the com port connection lets the EasyTouch talk to the cell..
I assume that currently your spillover from the spa into the pool runs all the time the pool pump is running and you are in the Pool mode.. Is that true?
Thanks,
Jim R.
The AC power for the Power Center would come from the load side of the Pump/Filter relay, which is the one in the upper left of the cabinet.
You also will need to connect the com port (J20) on the main EasyTouch board to the com port inside the Power Center.
Doing these two things makes sure the power center only get AC power when the IntelliFlo pump is running, and the com port connection lets the EasyTouch talk to the cell..
I assume that currently your spillover from the spa into the pool runs all the time the pool pump is running and you are in the Pool mode.. Is that true?
Thanks,
Jim R.