blazer58
Silver Supporter
- May 29, 2018
- 404
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pureline Crystal Pure 60,000
From what I can see from the pic.....
You need a 100 amp panel, new wire, and maybe conduit as it looks like the feed is 3/4 and plastic.
I also do not see a ground from the main panel.
I agree you need a licensed electrician to review your existing load, look at wire size to your subpanel, and they can give you the best options.
If it was me, and my gas heater was still in good working order, I would keep using it, instead of switching to a heat pump
You need a 100 amp panel, new wire, and maybe conduit as it looks like the feed is 3/4 and plastic.
I also do not see a ground from the main panel.
I agree you need a licensed electrician to review your existing load, look at wire size to your subpanel, and they can give you the best options.
If it was me, and my gas heater was still in good working order, I would keep using it, instead of switching to a heat pump