Anyone know what the fix is? I’m suspecting it has to do with the water return valve?
Water falling when spa in the pool is heating
- Thread starter Geoleo1234
- Start date
- Jul 21, 2013
- 66,446
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Water falling as in the spillover running or water falling as in the spa is draining?
If the return valve was not fully closed to the pool in SPA mode your spa would drain.
Post pics of your equipment pad and RETURN and SUCTION valves in POOL mode and SPA mode.
Water falling as in the spillover running or water falling as in the spa is draining?
If the return valve was not fully closed to the pool in SPA mode your spa would drain.
Post pics of your equipment pad and RETURN and SUCTION valves in POOL mode and SPA mode.
G,
I don't fully understand what problem you have??
I assume that you are in the spa mode, with the heater on, and the water level is dropping in the spa. Is that correct?
In the spa mode, the Intake valve should be sucking water from the spa drains and the Return valve should be sending all the water back to the spa. If the Return valve is not working, or not fully working, then the pump would be sucking more water out of the spa then is coming in from the Return valve.
As a test you can put the system in the Pool mode and see where the automated Intake and Return valves are positioned. Then put the system into the Spa mode and you should see both valves move about 180 degrees.
Thanks,
Jim R.
I don't fully understand what problem you have??
I assume that you are in the spa mode, with the heater on, and the water level is dropping in the spa. Is that correct?
In the spa mode, the Intake valve should be sucking water from the spa drains and the Return valve should be sending all the water back to the spa. If the Return valve is not working, or not fully working, then the pump would be sucking more water out of the spa then is coming in from the Return valve.
As a test you can put the system in the Pool mode and see where the automated Intake and Return valves are positioned. Then put the system into the Spa mode and you should see both valves move about 180 degrees.
Thanks,
Jim R.
Similar threads
