I’ve had my pool for 5 years with minimal issues. Now I can’t seem to trust any test as they all give me different readings. Specifically with the CYA, calcium, and alkalinity. I have new reagents in my tf-100 and that’s what I’ve been using for the past 5 years. I replaced half the water in my pool because the calcium was high and the calcium level didn’t change. Went to Leslie’s just to get the water tested and it showed low. Also showed my alkalinity was way down but the tf-100 says differently. So I bought a third kit and got something totally different. I’m at a loss.
Also, my chlorine generator has stopped producing. Has a new salt cell and has been working fine. No error codes on the panel. Having to use bleach at the moment. Not sure what is going on there either. Any advice or suggestions would be greatly appreciated!
Also, my chlorine generator has stopped producing. Has a new salt cell and has been working fine. No error codes on the panel. Having to use bleach at the moment. Not sure what is going on there either. Any advice or suggestions would be greatly appreciated!