I have a SunTouch and Intelliflo VS and the Intelliflo is running two programs. How to I stop the 2nd program from running?
Gratefully,
Tom
Gratefully,
Tom
SunTouch and Intelliflo VS
- Thread starter Tabsher
- Start date
- Jul 21, 2013
- 53,010
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Describe the two programs that are running?
Only one program can run at a time and typically the program with the higher RPM setting takes priority.
Describe the two programs that are running?
Only one program can run at a time and typically the program with the higher RPM setting takes priority.
Tom,
Not sure I fully understand the problem.. The program(s) should be in the pump.. The SunTouch just tells the pump to come on, or run at a specific speed, when the solar temp sensor says it is time to run the solar, based on water temp..
Tell us more about the problem and maybe we can help..
Thanks,
Jim R.
Not sure I fully understand the problem.. The program(s) should be in the pump.. The SunTouch just tells the pump to come on, or run at a specific speed, when the solar temp sensor says it is time to run the solar, based on water temp..
Tell us more about the problem and maybe we can help..
Thanks,
Jim R.
Similar threads
