I FINALLY got my new VSP wired for my AGP. Turned it on tonight, and I get a loud squealing noise at high speeds. My initial thought is perhaps an air leak? Interested to hear other opinions though
Ok, that makes sense.
Note: The heater does not have a flow switch. So, don't leave it on when in bypass because it can turn on and overheat.
Check for a loose diffuser oring when you get a chance.
Adding a flow switch and connecting it to the fireman's switch is a good idea to keep the heater from running with no flow.I'm thinking that now that I have the pump I have I can wire up the "fireman's switch"? Just need to figure out how do do that. Will open the pump basket and check the o-ring this evening when I get home.