I have a pentair variable speed and i went to set up spring schedule for the pump and the screen says err 000f cant do anything on the pump and dont want the pool turning on me any ideas as to what this is and how to fix it
Welcome to TFP... A Great resource for all your pool questions...
What specific Pentair VS pump do you have? Do you have an automation system tied to the pump?
The info below is from the Superflo manual.. You can try it, and it certainly can't hurt.
If an alarm is triggered the drive’s LCD screen will display the fault code text and the SuperFlo® VS Variable
Speed Pump will stop running. Disconnect power to the pump and wait until the keypad LEDs have all turned
off. At this point, reconnect power to the pump. If the error has not cleared then proper troubleshooting will be
required. Use the error description table below to begin troubleshooting.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!