Pebble plaster issue

poolcurious7

0
Bronze Supporter
Sep 20, 2018
105
Florida
We just had our stonescapes plaster installed about 2 week ago and I noticed a few imperfections/holes in the deep end.
Is this common. What is the typical fix? Im
Hoping the pool doesn’t need to be drained.

96993
 
Last edited:
Well, it’s definitely not “normal”. I suspect they will want to wait till the plaster is fully cured, and all plaster dust is gone, before attempting a fix. I would think that some draining will be necessary do to it being in the deep end.
 
7,

When my pool was first built, I had a couple similar spots that showed up after a few weeks.. They sent a guy out with some kind mask and breathing gear that stayed on the deck.. He fixed it in a few minutes and I have not had any problems since..

Thanks,

Jim R.
 
I’m no expert on plaster, but it might be an easy fix. Let me get some others to chime in. @kimkats @ajw22 @bdavis466

Yeah, I saw that. I don't know what type of finish it is. It may be real difficult to get a perfect color match and the patches not showing. The fix may be worse then the way it is.

If the problem is not widespread nor deep I would just accept it that plastering is hand done and has imperfections. Those look like small problems compared to many others.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.