First post here so hi, and forgive me if this is a common issue. I searched but didn't seem to find much. I am having an issue with my Aquarite system. The system was installed in 2013 and I'm still on my original T-15 cell. We are in a Midwestern climate so we only use the pool five months a year. I recently replaced the thermistor (for the second time). Salt levels and instant salinity are both at 3200. Last time we checked the real salt levels it was pretty close to that, so that portion seems to be functioning correctly.
The issue now is that the % desired output on the display fluctuates from 8P to 11P, switching back and forth every couple seconds. It does this regardless of the knob position, and does not change when I turn the knob. I don't have any automation equipment installed. When I switch it to super chlorinate it will say 100P and stay there. We are also getting very low residual chlorine levels in the pool, so it's clear the system is not running very much.
Any ideas?
The issue now is that the % desired output on the display fluctuates from 8P to 11P, switching back and forth every couple seconds. It does this regardless of the knob position, and does not change when I turn the knob. I don't have any automation equipment installed. When I switch it to super chlorinate it will say 100P and stay there. We are also getting very low residual chlorine levels in the pool, so it's clear the system is not running very much.
Any ideas?